The Chemical Connection: Common Misconceptions in Wet Processing
It’s Only Common Sense: Selling to Engineers
Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
Unimicron Germany Rises from the Ashes with New Smart Factory
April 30, 2018 | Pete Starkey, I-Connect007 and Michael Weinhold, EIPCEstimated reading time: 9 minutes
Figure 10: Robot loading AOI machine.
Figure 11: AOI verification station.
Figure 12: Lay-up station with pin-less registration.
Prepreg was stored in a fully-automated clean-room at 6°C to maximise its shelf-life and avoid wastage. The material management system drew the required material from cold storage 24 hours in advance, to allow it to condition to ambient temperature before lay-up, and again all the handling was by robot. The whole lay-up operation was carried out in Class 1000 cleanroom enclosures.
Housed in their own enclosure were eight laminating presses—five heating and three cooling. One of the hot presses was capable of 400°C operation to enable fusion bonding of PTFE when required.
Figure 13: Press area.
From the automated breakdown stations, the press plates returned through a surface-brushing machine for re-use, and the bonded panels proceeded to a trimming and edge-dressing station. This machine attracted a lot of spectators as its robot presented each panel four times to the trimming guillotine, once for each edge, then placed it on a table and swivelled to present a milling head that polished the edges and rounded the corners—fun to watch!
Figure 14: Robot panel trimming and edge dressing.
Page 3 of 6
Share on:
Suggested Items
Elephantech: For a Greener Tomorrow
04/16/2025 | Marcy LaRont, PCB007 MagazineNobuhiko Okamoto is the global sales and marketing manager for Elephantech Inc., a Japanese startup with a vision to make electronics more sustainable. The company is developing a metal inkjet technology that can print directly on the substrate and then give it a copper thickness by plating. In this interview, he discusses this novel technology's environmental advantages, as well as its potential benefits for the PCB manufacturing and semiconductor packaging segments.
Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
04/15/2025 | Michael Carano -- Column: Trouble in Your TankThere are numerous factors at play in the science of electroplating or, as most often called, electrolytic plating. One critical element is the use of organic addition agents and their role in copper plating. The function and use of these chemical compounds will be explored in more detail.
IDTechEx Highlights Recyclable Materials for PCBs
04/10/2025 | IDTechExConventional printed circuit board (PCB) manufacturing is wasteful, harmful to the environment and energy intensive. This can be mitigated by the implementation of new recyclable materials and technologies, which have the potential to revolutionize electronics manufacturing.
Connect the Dots: Stop Killing Your Yield—The Hidden Cost of Design Oversights
04/03/2025 | Matt Stevenson -- Column: Connect the DotsI’ve been in this industry long enough to recognize red flags in PCB designs. When designers send over PCBs that look great on the computer screen but have hidden flaws, it can lead to manufacturing problems. I have seen this happen too often: manufacturing delays, yield losses, and designers asking, “Why didn’t anyone tell me sooner?” Here’s the thing: Minor design improvements can greatly impact manufacturing yield, and design oversights can lead to expensive bottlenecks. Here’s how to find the hidden flaws in a design and avoid disaster.
Real Time with... IPC APEX EXPO 2025: Tariffs and Supply Chains in U.S. Electronics Manufacturing
04/01/2025 | Real Time with...IPC APEX EXPOChris Mitchell, VP of Global Government Relations for IPC, discusses IPC's concerns about tariffs on copper and their impact on U.S. electronics manufacturing. He emphasizes the complexity of supply chains and the need for policymakers to understand their effects.