SCHWEIZER Posts Successful Start in Fiscal Year 2018
May 8, 2018 | Schweizer Electronic AGEstimated reading time: 2 minutes
With a turnover of 31.8 million euro in the first quarter 2018 (2017: 32.4 million euro), the SCHWEIZER Group met its expectations. The group’s EBITDA (earnings be- fore interest, taxes, depreciation and amortisation) remained stable compared to last year’s first quarter at 3.5 million euro, whereby the EBITDA margin of 10.9% slightly exceeded last year’s value (2017: 10.7%). The EBIT (earnings before interest and taxes) increased to 1.6 million euro (2017: 1.5 million euro), corresponding to an EBIT margin of 4.9 percent (2017: 4.5%).
Backed by a good economic development as expected, the positive trend continued in SCHWEIZER’s most important customer segment automotive as well. The pressure to implement the demanding CO2- reductions and the fast pace of technological developments in the areas of auton- omous driving and lighting technologies have a positive impact on the demand for SCHWEIZER’s printed circuit boards. Increasing bottle necks in the supply chain of car manufactures, in particular in the components sector however, set limits to the actual growth potential.
SCHWEIZER still achieves the major part of its turnover with customers from the automotive sector. Sales with this customer segment came up to 22.1 million euro in the first quarter (2017: 23.1 mil- lion euro). Sales in the industry segment increased by 10.4% to 7.4 million euro, while the development with the other customers remained stable.
The production site in Schramberg accounted for 88% of the total turnover, the partner net- work in Asia for 12%. Series production started at Meiko Electronics in Vietnam as well as at WUS Kunshan. We expect further output increases from here in the coming quarters.
SCHWEIZER’s balance sheet figures and the operative cash flow remain at a good level, debts slightly increased to 52.9 million euro (December 31, 2017: 51.3 million euro). While the financial liabilities were reduced further, other reserves increased. The equity capital rose to 64.3 million euro so that the equity ratio came up to 54.9% (December 31, 2017: 54.9%). Net gear- ing amounted to -4.5%. This means the liquid assets continue to be higher than the fixed-rate debts. In the previous year’s quarter this amounted to +0.9%.
Forecast for 2018 Confirmed
“We are very happy with the start into the new fiscal year. We further on expect our turnover to in- crease by 6 to 8% to a level slightly below 130 million euro. The turnover achievements of the first quarter and the expected sales increases through our partner network reaffirm this forecast. Concerning the EBITDA we also stay with our previous estimate of about 10 million euro or an EBITDA margin of 7 to 9%. Besides the usual seasonal influences we also expect an impact deriving from the start of the construction period of our site in China”, comments Marc Bunz, Chief Financial Officer of Schweizer Electronic AG.
About Schweizer
Schweizer Electronic AG stands for state-of-the-art technology and consultancy competence. SCHWEIZER’s premium printed circuit boards and innovative solutions and services for automotive, solar, industry and avia- tion electronics address key challenges in the areas of Power Electronics, Embedding and System Cost Re- duction. Its products are distinguished for their superior quality and their energy-saving and environmentally- friendly features. Together with its partners WUS Printed Circuit (Kunshan) Co., Ltd., Meiko Electronics Co. Ltd. and Elekonta Marek GmbH & Co. KG the company offers in its division electronics cost- and production- optimised solutions for small, medium and large series. Together with its partner Infineon Technologies AG, SCHWEIZER plans to jointly tap the chip embedding market in future.
Suggested Items
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
KYZEN’s Adam Klett to Keynote at SMTA Electronics in Harsh Environments Conference
05/07/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, announced today that KYZEN’s Director of Science, Adam Klett, PhD will present as a keynote speaker at the SMTA Electronics in Harsh Environments Conference. The event is scheduled to take place May 14-16, 2024 at the Technical University of Denmark in Copenhagen, Denmark.
Altus Equips SSTL with Advanced Cleaning Technology for Electronics
05/07/2024 | Altus GroupAltus Group, a leading supplier of capital equipment for the electronics manufacturing industry, has announced the successful installation of an advanced PCBA cleaning system at Surrey Satellite Technology Limited (SSTL).
GPV's Handover of Refurbished Factory Building
05/07/2024 | GPVOn 6 May 2024, Bjorn Fiskers, MD at GPV Electronics TH in Thailand and his team were handed the keys to our refurbished factory building, adding another 7,000 sqm to our current 15,000 sqm electronics factory. Our electronics factory in Thailand will comprise of a total of 22,000 sqm.