Mark Curtin on Large-Board Stencil Printing and Metal Squeegees
September 24, 2018 | Stephen Las Marias, I-Connect007Estimated reading time: 2 minutes

Transition Automation Inc. recently developed a large-area benchtop stencil printer targeted for high-mix low- or medium-volume production. Said to be one of the largest SMT printers available in the world, the PrinTEK AP-3224-V fine pitch SMT printer features a print area of 40" x 24" (101 cm by 61 cm) and uses lightweight composite materials in its design. According to Mark Curtin, president of Transition Automation, it is the first tool that enables users to do large-board production for under $75,000.
"It's nice to do development that's driven by the customer," said Curtin. "And I designed it to build more of them in the hopes that there will be other people that have difficult issues related to large-board production."
Curtin notes that there are just no available large-area stencil printers in the market. "You do a search, and you can’t find any machine. You can find large silk-screening machines, but that’s a different process. You may struggle with converting it to solder paste printing," he says.
The PrinTEK AP-3224-V is dedicated for stencil printing for solder paste. "Because it is an open system, and because it uses composite materials, you can actually order it, receive it in a crate, and be running it within an hour of receiving it. Whereas with most automated machine, you will have a crew and a rig coming in, and it is going to take several days to get it set up," Curtin says. "Considering a solution for a large board production, it is not a huge machine. Even the footprint of this is the same as the footprint of just a standard 18-by-18 automated printer. But it’s giving the print area double that, so that's pretty unique."
Metal vs Rubber Squeegee
One of the key factors contributing to defects in PCB assembly is the paste printing process. Curtin agrees. He also highlights the squeegee as among the key factors causing the defects.
"The one main thing that we always have been promoting is the idea that the squeegee, even though it is a very small, almost infinitesimal item, has a disproportional burden of providing the quality for the SMT line. If you would take one item (rubber squeegee) and reshape it in a minor way, it will result in a complete dysfunction for your SMT line,” explains Curtin. “So, the squeegee is one of the key things for quality and therefore it should also be built tough, built accurate, and it should have some features on it."
He notes that rubber was always used because with liquid ink printing, you need rubber to form a liquid gasket. But when the silkscreen printing was modified to stencil printing, where a stencil is used instead of a silkscreen, there is now a smooth surface on top, not a calendared screen.
"So now, you don’t need a rubber squeegee; you use a metal squeegee. The main thing that it does is shear the solder paste clean on the top of the stencil. It doesn't fit into the openings of the stencil, and because you are not dipping into the aperture, you are not wearing it out," says Curtin. "Because when a rubber goes over the aperture, it dips in, and it can shear off. Then you get lots of rubber microparts ending up in the solder paste. That will definitely contribute to voiding and gas problems in reflow."
Which is why, according to Curtin, metal squeegee is the way to go.
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Powering Progress: Summer 2025 Community Magazine Now Available
07/22/2025 | Community MagazineIn the new Summer 2025 edition of Community Magazine, members of the Global Electronics Association demonstrate what progress really looks like—through innovation on the factory floor, influence on public policy, and investment in the next generation of engineers.
TRI to Exhibit at SMTA Queretaro Expo 2025
07/16/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems for the electronics manufacturing industry, is pleased to announce plans to exhibit at the SMTA Querétaro Expo 2025, scheduled to take place on July 24, 2025, at the Querétaro Centro de Congresos y Teatro Metropolitano.
Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
07/17/2025 | Jerome Larez -- Column: Global PCB ConnectionsIf you’ve ever seen an excellent PCB quote delayed, or worse, go cold because of a single line on the fab print, you’re not alone. Often, that line reads something like, “Use 370HR only,” or “IT-180A required.” These and other brand-name materials are proven performers, but unless your design needs that specific resin system (say, for RF performance, thermal reliability, or stringent CAF resistance), you may inadvertently be holding your job hostage.
IPC Hall of Fame Spotlight Series: Highlighting Lionel Fullwood
07/15/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. This special series on IPC Hall of Fame members provides a reminder of who was honored and why. As a bonus, for those who are still around, we get to find out what these talented individuals are up to today.
TRI Unveils New Platform for Diverse Board Sizes
07/14/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, proudly introduces a new size configuration for SPI and AOI Models.