Super Sensitive Sensor 'Tastes' and 'Sniffs'
March 14, 2019 | Technion-Israel Institute of TechnologyEstimated reading time: 3 minutes
Researchers from the Technion-Israel Institute of Technology in Haifa have developed an innovative sensing system capable of identifying and distinguishing different stimuli. The system is based on origami (the art of paper folding) combined with ink developed at the Technion.
The Israeli researchers have developed an innovative sensing system capable of identifying and distinguishing different stimuli. The research, just published in the journal Nature Communications, was led by Professor Hossam Haick of the Technion’s Wolfson Faculty of Chemical Engineering and the Russell Berrie Nanotechnology Institute, and Dr. Min Zhang, who did his post-doctoral fellowship with him. Dr. Zhang is currently an associate professor at East China Normal University.
“Today, there is significant demand for multi-purpose sensing systems for specific purposes,” said Prof. Haick. “These systems have great potential as applications in medicine, counterterrorism, food safety, environmental monitoring, ‘The Internet of things’ and more. The problem is that existing technologies, such as gas chromatography, have many disadvantages, including high cost.”
The challenge facing the researchers was to develop a single system sensitive enough to identify and distinguish among different stimuli. They say they developed a solution inspired by nature. “When we think about the human sensory system, we think of a whole that brings all the data to the brain in a format that it understands. That inspired our development, which is meant to concentrate in a different place all the environmental data we want to monitor. It is a multi-purpose sensory system that absorbs the stimuli and distinguishes among them.”
The system developed by Prof. Haick and Dr. Zhang, called “origami hierarchical sensor array” (OHSA), is an integrated array of grouped sensors written on the target object in conductive ink that the two scientists developed. It is a single device that demonstrates sensing abilities and detecting physical and chemical stimuli—temperature, humidity, light and volatile organic particles—at high resolution of time and space. Since it also distinguishes between isomers and chiral enantiomers (forms that are mirror images of each other), it paves new avenues for medical diagnosis. It is worth noting that volatile particle monitoring can be useful in a variety of areas including the diagnosis of disease and monitoring of dangerous substances.
There are many advantages to this unique ink – its low price, the ability to produce it in large quantities and the simplicity of its application on the target surfaces. The researchers conducted experiments that included control groups (other types of ink) and showed that the special ink attaches itself tightly to materials such as aluminum foil; glass; photo paper; Kapton tape (a polyimide film developed by DuPont in the late 1960s that remains stable across a wide range of temperatures and is used in, among other things, flexible printed circuits and thermal blankets used on spacecraft, satellites, and various space instruments; nitrile (the material used to make disposable gloves); and polydimethylsiloxane (PDMS, used to make contact lenses and for medical technologies and cosmetics).
The ink also allows writing on human skin and nails in a kind of conductive tattoo, waterproof—which may allow, for example, constant monitoring of relevant physiological variables. In addition, it can also be used on human skin and fingernails as a kind of water-resistant, conductive tattoo—which can make possible, for example, constant monitoring of relevant physiological variables.
“We can say that our system identifies the ‘fingerprints’ of chemical and physical stimuli and supplies information about them,” said Prof. Haick. Its low cost will make possible its application in many places, including poor areas, for medical and other uses.”
Optical Microscope images of composite made of melanin-analogous polydopamine and graphene, coating (a) paper; and (b) flexible substrate made of Kapton
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
United Electronics Corporation Unveils Revolutionary CIMS Galaxy 30 Automated Optical Inspection System
09/11/2025 | United Electronics CorporationUnited Electronics Corporation (UEC) today announced the launch of its new groundbreaking CIMS Galaxy 30 Automated Optical Inspection (AOI) machine, setting a new industry standard for precision electronics manufacturing quality control. The Galaxy 30, developed and manufactured by CIMS, represents a significant leap forward in inspection technology, delivering exceptional speed improvements and introducing cutting-edge artificial intelligence capabilities.
IPS, SEL Raise the Bar for ENIG Automation in North America
09/11/2025 | Mike Brask, IPSIPS has installed a state-of-the-art automated ENIG plating line at Schweitzer Engineering Laboratories’ PCB facility in Moscow, Idaho. The 81-foot, fully enclosed line sets a new standard for automation, safety, and efficiency in North American PCB manufacturing and represents one of the largest fully enclosed final finish lines in operation.
Smart Automation: Odd-form Assembly—Dedicated Insertion Equipment Matters
09/09/2025 | Josh Casper -- Column: Smart AutomationLarge, irregular, or mechanically unique parts, often referred to as odd-form components, have never truly disappeared from electronics manufacturing. While many in the industry have been pursuing miniaturization, faster placement speeds, and higher-density PCBs, certain market sectors are moving in the opposite direction.
Machvision Leads Shift to Automated Inline Final Inspection, AOI in North America
09/10/2025 | Ralph Jacobo, all4-PCBSchweitzer Engineering Laboratories (SEL) chose Machvision inspection equipment due to its capabilities and versatility. Machvision of Taiwan offers circuit inspection, hole inspection and measurement, IC Substrate and HDI inspection, and final visual inspection solutions. The best fit for SEL was the 4.0Pro Circuit Inspection for inner and outer layers, and the AFI6 for final visual inspection of finished panels.
Closing the Loop on PCB Etching Waste
09/09/2025 | Shawn Stone, IECAs the PCB industry continues its push toward greener, more cost-efficient operations, Sigma Engineering’s Mecer System offers a comprehensive solution to two of the industry’s most persistent pain points: etchant consumption and rinse water waste. Designed as a modular, fully automated platform, the Mecer System regenerates spent copper etchants—both alkaline and acidic—and simultaneously recycles rinse water, transforming a traditionally linear chemical process into a closed-loop system.