Researchers Generate the Shortest Ultraviolet Laser Pulse Ever
March 25, 2019 | Universität HamburgEstimated reading time: 2 minutes

Researchers at the Center for Free-Electron Laser Science (CFEL) have generated a 1.9-femtosecond ultraviolet laser light pulse—setting arecord for ultraviolet (UV) laser pulses with the shortest duration. The experiments, published in the recent issue of the scientific journal Optics Letters, outshine the previous record of 2.8 femtoseconds, set in 2010.
Image Caption: The 1.9-femtosecond UV flash is made via up-conversion of infrared light (in a gas cell in the glass cube in the centre of the vacuum chamber). Credit: DESY/ Calegari group.
The 1.9-femtosecond pulse (1 femtosecond is a millionth of a billionth of a second) has been generated in the laboratory of Prof. Francesca Calegari (Universität Hamburg, DESY) head of the attosecond science group at CFEL and member of the cluster of excellence CUI: Advanced Imaging of Matter. It covers the very relevant spectral region between 210 and 340 nanometres (nm), corresponding to the so-called UVB and UVC energy ranges. UVB radiation contained in the solar emission partially penetrates our atmosphere, thus triggering a number of bio-chemically relevant processes including damage of the DNA, leading to skin cancer. These processes are often based on ultrafast mechanisms that require extremely short light pulses to be captured in real time.
Generating Ultrashort UV Pulses has Always Been a Challenge
Generating ultrashort UV pulses has always been a challenge due to the high dispersion of light in this spectral region in air and in materials that are used for their generation. The approach used by the team of Prof. Calegari is frequency up-conversion of 5-femtosecond infrared pulses in a high-pressure laser-fabricated gas cell located in vacuum. This method allows for the shortest pulse duration to be preserved.
“Reaching the sub-2-femtosecond barrier represents an exciting result,” says Prof. Calegari. “By further optimizing the geometry for the pulse generation we could even push the duration down to attoseconds (1 attosecond is a billionth of a billionth of a second), a duration that is typically achieved at higher photon energies.”
Deeper Understanding of Bio-Damage Effects
The research conducted in the team of Prof. Calegari, in collaboration with the Institute of Photonics and Nanotechnology (IFN-CNR, Milano, Italy) and Politecnico di Milano (Milano, Italy), has been financed by the European Starting Grant STARLIGHT (STeering Attosecond electRon dynamics in biomolecules by UV/XUV LIGHT pulses) and it opens new important perspectives for ultrafast molecular spectroscopy, as a promising tool to reach a deeper understanding of the first instants of UV induced photochemical reactions and bio-damage effects. Text: DESY, ed.
Suggested Items
Foxconn's Tiger Leap Combining Nature and Technology in Ecological Roof Garden
04/23/2025 | FoxconnHon Hai Technology Group, the world's largest technology manufacturing and service provider, has actively responded to the United Nations Sustainable Development Goals (SDGs).
IDTechEx Highlights Recyclable Materials for PCBs
04/10/2025 | IDTechExConventional printed circuit board (PCB) manufacturing is wasteful, harmful to the environment and energy intensive. This can be mitigated by the implementation of new recyclable materials and technologies, which have the potential to revolutionize electronics manufacturing.
Bridging the Gap Between PCB Designers and Fabricators
04/03/2025 | Stephen V. Chavez, Siemens EDAWith today’s advanced EDA tools, designing complex PCBs in the virtual world does not necessarily mean they can be built in the real world. This makes the relationship between a PCB designer and a fabricator pivotal to the success of a project. In keeping with solid design for manufacturing (DFM) practices, clear and frequent communication is needed to dial and lock in design constraints that meet expectations while addressing manufacturing concerns.
Hitachi Announces Completion of New Production Facility for Semiconductor Manufacturing Equipment
04/01/2025 | JCN NewswireHitachi High-Tech Corporation announced that the new production facility for semiconductormanufacturing equipment (etch systems), which had been under construction since December 2023 in the Kasado area (Kudamatsu City, Yamaguchi Prefecture), was completed and started the operation on March 17, 2025.
Paige Fiet: From Emerging Engineer to Quality at TTM
03/19/2025 | Marcy LaRont, PCB007 MagazinePaige Fiet is a graduate of the IPC Emerging Engineer program and now works at TTM Technologies in Logan, Utah. She was an IPC Student Board Member and has been a columnist for I-Connect007. She is a stellar example and an encouragement to other young engineers about how to be successful in your early career.