AI to Monitor Pilot Drowsiness
March 28, 2019 | CSEM SAEstimated reading time: 1 minute
Last November, an Australian pilot fell asleep while operating a passenger flight, overshooting its destination by 50 kilometers. A few months earlier, in the United States, investigators found that an air disaster had been narrowly avoided in San Francisco the previous year. Once again, the danger had been brought about by a pilot's lack of sleep.
Fortunately, these incidents had no serious repercussions, but they are not isolated cases. Human fatigue is a serious issue affecting the safety of the traveling public in all modes of transportation. Nearly 20% of the major US Transportation Safety Board investigations completed between 2001 and 2012 identified fatigue as a probable cause, contributing factor, or a finding.
To address this issue, the Hardware Implementation of Pilot-Non-intrusive cOgnitive States Identification System (HIPNOSIS) consortium, led by CSEM, aims to improve the evaluation of pilot fatigue by providing innovative monitoring tools—namely, a specific vision-based system combined with a bio-physiological signal sensor.
Machine learning at the service of onboard safety
HIPNOSIS won the tender launched by the Clean Sky 2 Joint Undertaking, a European research program dedicated to aeronautics. Andrea Dunbar, head of Embedded Vision Systems at CSEM, explains, "We will implement computer vision and machine learning algorithms in order to detect signs of drowsiness in pilots in real time."
These algorithms will be integrated into a specific camera developed by the French startup Innov+, which already commercializes similar solutions for the automotive industry.
"CSEM will also use its know-how in the measurement of physiological parameters to develop a wearable sensor that monitors pilots before and during a flight," Dunbar adds. "The collected data will be fused with eye-gaze-related measures as well as head pose, observed by the vision system."
The French company SERMA Ingénierie will be in charge of integrating HIPNOSIS into a cockpit prototype for preliminary testing.
Honeywell Aerospace—Clean Sky II Core Partner and a leader in aerospace development and the manufacturer of avionics solutions—defines requirements for the technology developed by the HIPNOSIS project and integrates it into the overall pilot monitoring system.
"HIPNOSIS will deliver key enablers for the introduction of pilot monitoring and for turning this technology into aviation reality," enthuses Bohdan Blaha, project manager at Honeywell Aerospace. "HIPNOSIS provides building blocks critical to successfully demonstrating the potential of this technology and its benefit to the aviation industry."
Final results are expected in 2021.
Suggested Items
S&K Aerospace Awarded Major Contract Under DLA Maritime Acquisition Advancement Program
07/02/2025 | BUSINESS WIRES&K Aerospace, LLC has been awarded a significant contract under the Defense Logistics Agency’s (DLA) Maritime Acquisition Advancement Program, managed by the U.S. Naval Supply Command - Weapon Systems Support (NAVSUP WSS) in Mechanicsburg, PA.
Green Circuits to Exhibit Full-Service Electronics Manufacturing Solutions at 2025 SMD Symposium
07/02/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, is pleased to announce its participation in the 2025 SMD Symposium, taking place August 5-7 at the Von Braun Center in Huntsville, Alabama.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.