NASA ‘Nose’ Importance of Humans, Robots Exploring Together
April 19, 2019 | NASAEstimated reading time: 3 minutes

NASA is sending humans forward to the Moon, this time to stay. Upcoming expeditions to the Moon will require making every moment of astronaut time outside the safety of the Gateway in orbit and lunar lander system on the surface count. Robotics will enable lunar crews to do more while minimizing their risk.
NASA’s Satellite Servicing Projects Division is teaming up with the International Space Station to develop the technologies for this kind of astronaut-robotic collaboration, and tomorrow is launching a Robotic External Leak Locator (RELL) aboard Cygnus on Northrop Grumman’s 11th Commercial Resupply Services mission.
Spacecraft and habitats rely on extensive cooling systems. Just as coolant in a car is used to cool its engine, ammonia is circulated through a huge system of pumps, reservoirs and radiators on station to cool its complex life support systems, spacecraft equipment and science experiments. RELL is a “sniffer,” or a robotic, remote-controlled tool that helps mission operators detect the location of external ammonia leaks on space station and rapidly confirm a successful repair.
The Robotic External Leak Locator flight unit before launch.
“RELL capabilities help mitigate the risk of the potentially severe impacts to the space station presented by an external ammonia leak,” said Christopher Craw, ISS Senior Systems Integration Lead at NASA’s Johnson Space Center in Houston.
When it arrives at ISS, this will be the second RELL on board and will serve as a spare. The first flight RELL is already on board station where it successfully located a leak in one of these systems, significantly reducing astronaut time required outside of station to inspect and repair the leak.
“The decision to build and fly another flight unit seemed like the obvious choice to ensure this capability was going to be available to the ISS Program through the rest of spacecraft’s life,” said Adam Naids, ISS Hardware Development Engineer at NASA’s Johnson Space Center.
Astronaut Shane Kimbrough with RELL aboard the International Space Station.
After Cygnus delivers the second RELL to station, the plan is to store the unit until an ammonia leak is detected. Then, a game of “hot and cold” would begin. Affixed to the Canadian Space Agency’s Dextre robot arm, RELL would be moved around the outside of station using its mass spectrometer “sniffer” to locate ammonia leaks. When RELL is directed toward a leak, it returns a higher signal. The higher the signal, the closer the leak. This process allows RELL to pinpoint the source of any given ammonia leak, giving space station managers the information they need to understand and correct the problem.
Before RELL, astronauts manually searched for leaks on spacewalks, which always carry an element of risk. The Leak Locator that is currently stationed in-orbit has proven its worth, paving the way for the second unit.
Both RELL units will eventually be stored in the Robotics Tool Stowage, or RiTS, which is still in development. Once installed to the outside of station, RiTS will store the instruments so they are available when needed to track down a leak.
The RELL design includes two sensors: a mass spectrometer and a total pressure gauge.
Page 1 of 2
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
DARPA: Sensor-guided Robots Could Boost Lifesaving Combat Casualty Care
09/09/2025 | DARPAOne of the most significant challenges in treating battlefield injuries is finding and stopping severe bleeding in the torso, a condition known as non-compressible torso hemorrhage. Limitations in frontline medical facilities mean that many warfighters die from injuries that could be survivable with more immediate surgical care.
Teradyne Names New Teradyne Robotics Group President
09/03/2025 | BUSINESS WIRETeradyne, Inc. named Jean-Pierre “JP” Hathout as President of the Teradyne Robotics Group, succeeding Ujjwal Kumar. Hathout was appointed President of Universal Robots in May and was previously President of Mobile Industrial Robotics (MiR) for two years.
Pusan National University Scientists Develop Self-Deploying Material for Next-Gen Robotics
09/02/2025 | PRNewswireThe field of robotics has transformed drastically in this century, with a special focus on soft robotics. In this context, origami-inspired deployable structures with compact storage and efficient deployment features have gained prominence in aerospace, architecture, and medical fields.
Amtech Unveils Proprietary Automation Model for High-Mix, Low-Volume Manufacturing
08/29/2025 | AmtechAmtech Electrocircuits, a leading provider of manufacturing solutions, announced the introduction of its proprietary automation model designed specifically for high-mix, low-volume (HMLV) production environments.
Oceaneering Announces $180 Million of Subsea Robotics Contracts with Petrobras
08/29/2025 | BUSINESS WIREOceaneering International, Inc. announced that its Brazilian subsidiary, Marine Production Systems do Brasil LTDA (MPS), was awarded multiple Subsea Robotics contracts by Petróleo Brasileiro S.A. (Petrobras) during the second quarter of 2025, following a competitive tender. The anticipated aggregate revenue of the contracts is approximately $180 million.