SpaceX Rocket Delivers Aggie Capstone Project To International Space Station
May 30, 2019 | Texas A&M UniversityEstimated reading time: 3 minutes

The SpaceX Falcon 9 rocket with the Dragon cargo module lifted off from the Florida Space Launch Complex 40 at Cape Canaveral Air Force Station on May 4. The Commercial Resupply Services mission (CRS-17) launched over 5,550 pounds of NASA cargo into orbit and successfully delivered it to the International Space Station (ISS) on May 6.
Included in this cargo was a Texas A&M University undergraduate capstone team’s final project, an experiment facility known as Hermes, which will be used to conduct experiments on asteroid particles in space.
The team, made up of Multidisciplinary Engineering Technology (MXET) mechatronics students Luis Orozco (embedded software), Dustin Tish (hardware systems) and Jeremy Coffelt (Python software, security and communications), celebrated the culmination of over a year’s work as they watched their project be launched into space.
The students took over the Hermes prototype that was developed by an electronic systems engineering technology capstone team and moved their design to the three production systems that underwent testing, validation and acceptance by T STAR, NASA engineers and scientists at the Johnson Space Center.
The first of its kind, Hermes is a Class-1E experiment facility that will host and support four microgravity experiment tubes that will be changed out every three to six months by an ISS mission specialist through 2024. The first set of four Hermes experiments will investigate microgravity effects on regolith (moon dust) simulants.
“This is the type of project that clearly demands the broad-based experiential education available to students pursuing the new MXET mechatronics focus area at Texas A&M,” stated Matthew Leonard, president of T STAR.
Hermes is a self-contained system that is responsible for the monitoring and control of all aspects of the facility. The system is composed of seven embedded intelligence devices. Six of them use a real-time operating system environment to monitor and control particular aspects of the facility or an individual experiment. One of the devices is a BeagleBone Black, which is the overall system and communications manager providing near real-time data and control capabilities for the scientists and engineers on earth. Hermes provides lighting, imagery and vacuum resources to each experiment while transferring all data collected to both the solid-state storage that is part of the experiment cassette and the ISS network drive to enable downloading on Earth. In addition, Hermes supports the addition of an external accelerometer that provides microgravity data to the scientists.
The public-private-academic model of applied research developed by T STAR has made the design and development of Hermes an unprecedented success. Using a capstone project to undertake the initial prototype design before moving that project to an applied research effort for product delivery is a unique approach to developing space-worthy systems within budget and schedule requirements.
Helikite has produced a working prototype capable of measuring small fluctuations in magnetic fields. This system will be tested in late June when it is attached to an ultralight aircraft and then towed by a ground-based vehicle. The system will allow NASA scientists to evaluate whether or not it could one day be used on Mars.
The Cardinal project implements a new approach to collecting asteroid particles at high altitudes. It is intended to be an experimental facility attached to a high-altitude weather balloon. Once launched, it will monitor several environmental parameters including barometric pressure. When a preset altitude is reached, the Cardinal will automatically open its collection chamber and begin rotating the dust collection arm at a fixed rate. Once the system determines that the balloon is in position, the rotating arm will be stowed and the chamber closed. This new concept of collecting particles will provide a longer mission time with less contamination from the collection system itself.
From the Hermes project to Helikite and Cardinal, Aggie students are changing the future of space experimentation and exploration.
Suggested Items
KYOCERA AVX Releases New 3DB Hybrid Couplers
07/04/2025 | PRNewswireKYOCERA AVX, a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future, released a new line of integrated thin film (ITF) hybrid couplers designed to facilitate the continued evolution of high-frequency wireless systems in industrial, automotive, telecommunications, and telemetry applications.
Accenture Acquires SYSTEMA to Drive Manufacturing Automation for Semiconductor Clients
07/02/2025 | AccentureAccenture has acquired SYSTEMA, a provider of software solutions and consulting services for manufacturing automation, headquartered in Dresden, Germany.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.