New Solution to Elderly Falls: Drones, Smartphones and Sensors
August 15, 2019 | UniSAEstimated reading time: 1 minute

Drones, smartphones and sensors could provide a lifeline to the world’s growing elderly population at risk of falls, helping to cut global hospital costs.
A new system has been designed by a team of researchers from Iraq and the University of South Australia to remotely monitor elderly people, detecting abnormalities in their heart rate and temperature which can lead to falls, and provide urgent first aid via a drone if a fall occurs.
UniSA Adjunct Senior Lecturer Dr Ali Al-Naji and Professor Javaan Chahl are working with Dr Sadik Kamel Gharghan and Saif Saad Fakhrulddin from Baghdad’s Middle Technical University to develop an advanced fall detection and first aid system for the elderly.
In a new paper published in Sensors, the researchers describe how a wearable device can monitor vital signs using a wireless sensor attached to the upper arm and send a message to an emergency call centre if physiological abnormalities or a fall are detected.
“When a case is critical, first aid supplies can be delivered to the patient and their carer via a drone, up to 105 seconds faster than an ambulance,” according to Prof Chahl.
“The system not only correctly measures heart rate and falls with 99% accuracy, but also identifies the elderly person’s location and delivers first aid much faster.”
“We have also designed an advanced smartphone-based program that uses an intelligent autopilot, containing a destination waypoint for planning the path of a drone,” says Dr Gharghan.
The fall detection device consists of a microcontroller, two bio-sensors, a GPS module to track the location and a GSM module to send a notification to the smartphones of caregivers. The second part includes a first aid package, a smartphone and a drone to deliver the package.
It is estimated that around 30% of adults over the age of 65 experience at least one fall a year, in many cases fracturing a hip, or sustaining head injuries.
The annual global cost of fall-related acute care for older people has risen dramatically in recent years as the world’s population ages. In Australia, the annual cost exceeds $600 million, and this figure blows out to billions of dollars each year in the United States and other parts of the world.
The most recent figures show that falls account for 40% of injury-related deaths and 1% of total deaths in people aged over 65 years.
Suggested Items
KYOCERA AVX Releases New 3DB Hybrid Couplers
07/04/2025 | PRNewswireKYOCERA AVX, a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future, released a new line of integrated thin film (ITF) hybrid couplers designed to facilitate the continued evolution of high-frequency wireless systems in industrial, automotive, telecommunications, and telemetry applications.
Accenture Acquires SYSTEMA to Drive Manufacturing Automation for Semiconductor Clients
07/02/2025 | AccentureAccenture has acquired SYSTEMA, a provider of software solutions and consulting services for manufacturing automation, headquartered in Dresden, Germany.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.