A Promising Step in Returning Bipedal Mobility
August 21, 2019 | CaltechEstimated reading time: 3 minutes

Engineers at Caltech have launched a new research initiative aimed at restoring natural and stable locomotion to individuals with walking deficiencies that result from spinal cord injuries and strokes.
This initiative, dubbed RoAM (Robotic Assisted Mobility), unites robotic assistive devices—including exoskeletons and prostheses—with artificial intelligence (AI)-infused neurocontrol. The RoAM initiative combines the research of two Caltech roboticists: Aaron Ames, who creates the algorithms that enable walking by bipedal robots and translates these to govern the motion of exoskeletons and prostheses; and Joel Burdick, whose transcutaneous spinal implants have already helped paraplegics in clinical trials to recover some leg function and, crucially, torso control.
A number of robotics companies have begun building exoskeletons—devices with robotic legs that a person can strap into—to provide mobility to individuals who are paralyzed from the waist down. The problem is that all of the current devices require the use of crutches to maintain stability.
"Bipedal walking is difficult to achieve in a stable fashion," says Ames, Bren Professor of Mechanical and Engineering and Control and Dynamical Systems in the Division of Engineering and Applied Science. "While crutches help users of the exoskeletons to stay upright, they undercut many of the health benefits that upright locomotion might otherwise provide. In addition, they do not allow users to do anything else with their hands while walking."
This is where the work of Ames and Burdick comes in.
Hear from Aaron Ames and Joel Burdick about their work on RoAM.
Ames has built programs that allow bipedal robots to walk, making them stable by applying methods from nonlinear control theory. His approach has resulted in efficient walking by humanoid robots, along with dynamic behaviors such as running and jumping. In collaboration with the French exoskeleton manufacturer Wandercraft and his colleague Jessy Grizzle from the University of Michigan, Ames has translated these methods from robots to powered lower-body exoskeletons. The end result was the first dynamic walking exoskeleton that could be used by paraplegics without the need for crutches. This has the potential to give paraplegics hands-free mobility, Ames says. In the future, coupling his work with spinal stimulation will enable direct feedback between the user and device.
Meanwhile Burdick, Richard L. and Dorothy M. Hayman Professor of Mechanical Engineering and Bioengineering and a research scientist at JPL, which Caltech manages for NASA, has been developing spinal implants that have restored some lower-body function to wearers in clinical trials.
The implant, developed in collaboration with Caltech biomedical engineer Yu-Chong Tai, Anna L. Rosen Professor of Electrical Engineering and Medical Engineering, and AI expert Yisong Yue, assistant professor of computing and mathematical sciences, provides electrical stimulation to the epidural space around the lower spinal cord while using AI to learn, in real time, the stimulation patterns that yield the best results for wearers. In clinical trials at UCLA, the prosthetic allowed paralyzed wearers to stand on their own for up to 20 minutes at a time and voluntarily move toes, ankles, knees, and hips.
One of the participants testing out the spinal stimulator also happened to own an exoskeleton, and so the researchers tested the two technologies together in a trial at UCLA three years ago. They found that when the spinal stimulator was turned on, the exoskeleton required half as much power to move the same distance as with the stimulator off.
"With the stimulator and the exosuit, he was almost stepping on his own," Burdick says. "That early study was very promising."
The RoAM initiative will explore the intersection of AI-infused spinal cord stimulation using a Wandercraft Atalante model exoskeleton located at Caltech. "The Atalante exoskeleton and the walking algorithms that we created for it are already good enough to allow users to walk dynamically without crutches," Ames says. "The RoAM initiative will let them do so using less power and for a variety of different dynamic walking behaviors, with the goal of improving the users' everyday lives."
Ultimately, the RoAM initiative will go beyond exoskeletons in exploring ways to restore mobility. The dynamic walking algorithms developed by Ames have already been translated to custom-built prostheses housed in his lab, including a powered leg for above-the-knee amputees. Additionally, soft exoskeletons—or exosuits—will be developed to help stabilize walking gaits for individuals who are not paralyzed but are mobility impaired.
The RoAM initiative is supported by Wandercraft, the Zeitlin Family Discovery Fund, and the Caltech Mechanical and Civil Engineering Big Ideas Fund.
Suggested Items
Real Time with... IPC APEX EXPO 2025: IPC Mexico Building Community and Partnerships
04/17/2025 | Real Time with...IPC APEX EXPOLorena Villanueva highlights IPC Mexico's three-year journey focused on community building and partnerships with governments and educational institutions. Key milestones include collaboration agreements with state governments and universities to enhance the electronics industry. IPC Days promotes networking and education, while a partnership with UNAM aims to integrate IPC training into engineering programs. The discussion wraps up with congratulations on IPC Mexico's achievements and the launch of the Mexico pavilion at this year's show.
Marcy’s Musings: Can You Hear the Voices?
04/16/2025 | Marcy LaRont -- Column: Marcy's MusingsTariffs, CapEx spending, the war in Ukraine, and domestic and global economies: I wanted to know what’s on your minds as we launch headlong into Q2 2025. So, this month, I’m highlighting industry voices and how they feel about their businesses, the effects of a new U.S. administration, and where technology is heading.
Bridging the Gap Between PCB Designers and Fabricators
04/03/2025 | Stephen V. Chavez, Siemens EDAWith today’s advanced EDA tools, designing complex PCBs in the virtual world does not necessarily mean they can be built in the real world. This makes the relationship between a PCB designer and a fabricator pivotal to the success of a project. In keeping with solid design for manufacturing (DFM) practices, clear and frequent communication is needed to dial and lock in design constraints that meet expectations while addressing manufacturing concerns.
Incap Launches ‘Incap Legends’ esports Tournament and Invites Students from Around the World to Participate
03/31/2025 | IncapIncap Corporation is proud to announce the launch of ‘Incap Legends’, a new esports tournament in partnership with Newcastle and Stafford Colleges Group (NSCG).
New Accenture Siemens Business Group to Reinvent Engineering and Manufacturing for Clients
03/31/2025 | BUSINESS WIRESiemens and Accenture are significantly advancing their long-standing alliance partnership to help clients reinvent and transform engineering and manufacturing.