-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
So Many Standards Committees, So Little Time
October 28, 2019 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes

During the IPC Summer Meetings and Panelpalooza in Raleigh, North Carolina, I met with Leo Lambert, vice president and director of technology at EPTAC. We discussed IPC’s recent efforts to revamp the way standards are developed and interpreted as well as changes to training and education committees and a variety of methods for eliminating errors and duplicated comments when revising standards.
Andy Shaughnessy: Another day, another show, Leo. You’re the chair for a couple of committees, so can you tell us what your committees have been doing at the summer meetings?
Leo Lambert: Back in the day, I was the chair of the J-STD-001 task group of the Assembly and Joining Committee; now, I’m the chair of the IPC-A-600 Committee. IPC is reorganizing and taking a look at the way the standards are being developed, the way the standards are interpreted, and how the test programs are going to be conducted. There are also new sets of policies, rules, and procedures for the training programs—one for CIT/MIT, one for CIS, and one for CSE—which everyone is anticipating. They have released the initial version, but there are still corrections that need to be addressed and implemented.
In the meantime, this delay creates a lot of angst for the people who are using them, and we had a meeting this morning on some of those issues. Today, we had training meetings, which are very important to the development of the programs; however, everyone wants to attend all of the meetings. Therefore, with so many people involved, it is difficult to reach a consensus in a short period of time since everyone has some input and want to be heard. I understand wanting to attend all of the meetings, but then you realize that there are only so many hours in the day, so it is slow-moving.
Since we’re involved in the training business, we need to go to the training meetings because that’s the material that we’re going to be using and presenting to the students. Additionally, there are many mistakes in those documents that must be corrected, and the new IPC organization is addressing all of these. However, it will take time and patience. These errors are repeated at each training program by all of the training centers, and multiple inputs are sent to the IPC, which become difficult to address in a timely manner.
To read the rest of this interview, which appeared in the September 2019 issue of Design007 Magazine, click here.
Suggested Items
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
IPC-CFX, 2.0: How to Use the QPL Effectively
07/02/2025 | Chris Jorgensen, Global Electronics AssociationIn part one of this series, we discussed the new features in CFX Version 2.0 and their implications for improved inter-machine communication. But what about bringing this new functionality to the shop floor? The IPC-CFX-2591 QPL is a powerful technical resource for manufacturers seeking CFX-enabled equipment. The Qualified Product List (QPL) helps streamline equipment selection by listing models verified for CFX compliance through a robust third-party virtual qualification process.
The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
07/08/2025 | Mike Konrad -- Column: The Knowledge BaseIn electronics manufacturing, there’s a dangerous misconception that cleaning and coating are standalone options, that they operate in different lanes, and that one can compensate for the other. Let’s clear that up now. Cleaning and conformal coating are not separate decisions. They are two chapters in the same story—the story of reliability.
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.