Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
Trouble in Your Tank: Can You Drill the Perfect Hole?
Clean vs. No-clean: A Generational Difference
December 24, 2019 | Barry Matties, I-Connect007Estimated reading time: 1 minute
Tom Forsythe, executive VP of KYZEN, discusses what readers should know about cleaning as reliability expectations continue to increase. He also explains what is driving the new interest in cleaning and why engineers from the no-clean generation may not even realize they need to learn more about cleaning.
Barry Matties: Tom, why don’t you start by telling us about your new generation of stencil and misprinted board cleaner.
Tom Forsythe: Absolutely. KYZEN E5631 has been under development for some time. The whole challenge for us, of course, is that contaminants, fluxes, and pastes are constantly evolving. Many leading solder makers around the world are trying to improve their performance because our mutual customers are demanding improved performance from them. It trickles down to the cleaning folks to make sure we can remove those residues, whether it’s uncured adhesives, uncured paste in a true stencil printing application, or anything down that road. That’s the key, and it’s an area that we’ve done a lot of research on over the last 5–10 years. It had been stagnant for a long time, but once you crack the egg and start working around, your development leads you in lots of different directions; that’s how 5631 came to be.
Matties: Is this driven by the finer features that are appearing?
Forsythe: The finer features drive back to the stencils. The companies making the stencils have issues because they have to make apertures that are smaller and closer together and more well-defined. As those apertures get smaller, then it becomes a bit more difficult to get things out of those smaller apertures and have flow go through them. It all cascades. But it fundamentally comes down to the materials. The bigger driver on the stencil side is the new materials. Remember, when you reflow paste, lots of volatiles come off. It goes through a state change and creates that hard encapsulant.
To read this entire interview, which appeared in the December 2019 issue of SMT007 Magazine, click here.
Share on:
Suggested Items
KYZEN to Highlight Understencil and PCB Cleaners at SMTA Querétaro Expo and Tech Forum
07/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Querétaro Expo & Tech Forum, scheduled to take place Thursday, July 24, at Centro de Congresos y Teatro Metropolitano de Querétaro.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Hands-On Demos Now Available for Apollo Seiko’s EF and AF Selective Soldering Lines
06/30/2025 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is excited to spotlight its expanded lineup of EF and AF Series Selective Soldering Systems, now available for live demonstrations in its newly dedicated demo room.
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
06/26/2025 | Team NCAB -- Column: Fresh PCB ConceptsMicro components have redefined what is possible in PCB design. With package sizes like 01005 and 0201 becoming more common in high-density layouts, designers are now expected to pack more performance into smaller spaces than ever before. While these advancements support miniaturization and functionality, they introduce new assembly challenges, particularly with traditional solder mask and legend application processes.