Raytheon to Help U.S. Air Force Modernize Missile Warning Architecture
January 29, 2020 | Raytheon CompanyEstimated reading time: 2 minutes
Raytheon Company will help the U.S. Air Force modernize its missile warning architecture with a new system that will collect and fuse data from an array of sensors to provide a comprehensive picture of launch activity under a 5-year, $197 million contract.
To help with this mission, Raytheon Intelligence, Information and Services has developed a completely open framework — which the Air Force calls the Future Operationally Resilient Ground Evolution (FORGE) Mission Data Processing Application Framework (MDPAF) — that will be capable of processing Overhead Persistent Infrared (OPIR) satellite data from both the U.S. Air Force's evolving Space Based Infrared System (SBIRS) constellation and the future Next Gen OPIR constellation, as well as be capable of processing data from other civil and environmental sensors.
"The U.S. government's global satellite network produces a constant flood of data — petabytes and petabytes of it every day," said Dave Wajsgras, president of Raytheon IIS. "The Air Force wants to open that network up so they can use as much of that data as possible. That's a huge transformation not just for the service, but for the whole government."
This is a significant departure from previous satellite ground control programs. Typically, companies would develop a system that collects and exploits data from specific types of satellites or sensors. FORGE changes this model as it's able to collect data from nearly any type of satellite or sensor, and then helps operators make sense of that data quickly.
"Essentially, this is a smartphone model," said Wajsgras. "We've built an operating system that everyone can build applications for – from Raytheon to the Air Force to universities to small companies. These applications allow the system to process specific types of data."
One of the key benefits of incorporating new applications is that the system can be used beyond its intended mission. For example, an application could be built that would allow civil agencies to use the same satellite data to help detect forest fires, volcanic activity, agricultural changes, even surges in electric power consumption.
Further departing from the traditional ground control development model, Raytheon built the prototype system in less than a year and it's capable of processing real data today. The company leveraged development work on several past programs, especially its Advanced Weather Integrated Processing System, to design the framework. Raytheon also incorporated its deep experience developing applications using DevSecOps and Agile software development processes to dramatically speed development.
Raytheon will work with the Air Force over the upcoming years to further evolve and prove the framework's capabilities.
Suggested Items
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.
IBM, RIKEN Unveil First IBM Quantum System Two Outside of the U.S.
06/24/2025 | IBMIBM and RIKEN, a national research laboratory in Japan, today unveiled the first IBM Quantum System Two ever to be deployed outside of the United States and beyond an IBM Quantum Data Center.
Excellon Installs COBRA Hybrid Laser at Innovative Circuits
06/23/2025 | ExcellonExcellon is pleased to announce the successful installation of a second COBRA Hybrid Laser System at Innovative Circuits, located in Alpharetta, Georgia. The Excellon COBRA Hybrid Laser System uniquely combines both UV and CO₂ (IR) laser sources on a single platform—making it ideal for high-density prototype and production printed circuit boards (PCBs).