Bosch Develops Rapid Test for COVID-19
March 26, 2020 | BoschEstimated reading time: 3 minutes

The coronavirus SARS-CoV-2 is posing major challenges for healthcare systems and medical institutions worldwide. An ability to rapidly diagnose the virus is of invaluable help in curbing its exponential spread in many countries. Bosch’s new, fully automated rapid test for COVID-19 can help medical facilities such as doctors’ offices, hospitals, laboratories, and health centers make fast diagnoses. The rapid molecular diagnostic test runs on the Vivalytic analysis device from Bosch Healthcare Solutions. “We want the Bosch rapid COVID-19 test to play a part in containing the coronavirus pandemic as quickly as possible. It will speed up the identification and isolation of infected patients,” says Dr. Volkmar Denner, chairman of the board of management of Robert Bosch GmbH.
Bosch CEO Dr. Volkmar Denner said, “Bosch’s rapid COVID-19 test will help contain the spread of the pandemic and break the chain of transmission more quickly”.
Faster certainty, slower spread
Developed in just six weeks, the rapid test can detect a SARS-CoV-2 coronavirus infection in patients in under two and a half hours – measured from the time the sample is taken to the time the result arrives. Another advantage of the rapid test is that it can be performed directly at the point of care. This eliminates the need to transport samples, which takes up valuable time. It also means patients quickly gain certainty about their state of health, while allowing infected individuals to be identified and isolated immediately. With the tests currently in use, patients must usually wait one to two days for a result. “Time is of the essence in the fight against coronavirus. Reliable, rapid diagnosis directly on site with no back and forth – that is the great advantage of our solution, which we see as another example of technology that is ‘Invented for life,” Denner says.
Differential diagnosis: diagnosing ten respiratory pathogens simultaneously
Bosch’s rapid test is one of the world’s first fully automated molecular diagnostic tests that can be used directly by all medical institutions. What’s more, it allows a single sample to be tested not just for COVID-19 but also for nine other respiratory diseases, including influenza A and B, simultaneously. “The special feature of the Bosch test is that it offers differential diagnosis, which saves doctors the additional time needed for further tests. It also provides them with a reliable diagnosis quickly so they can then begin suitable treatment faster,” says Marc Meier, president of Bosch Healthcare Solutions GmbH. The newly developed test will be available in Germany starting in April, with other markets in Europe and elsewhere to follow.
Bosch’s rapid COVID-19 test is the result of collaboration between the company’s Bosch Healthcare Solutions subsidiary and the Northern Irish medical technology company Randox Laboratories Ltd. “Together with our partner Randox, we have succeeded in developing this innovative rapid test within a very short time frame, and we are now in a position to offer it to the market. The Bosch Vivalytic analysis device evaluates the test safely and reliably directly in the hospital, in the lab, or in the doctor’s office, guaranteeing the best possible protection for patients and medical staff,” Meier says. The company is currently examining how it can help doctors and nursing staff in medical facilities such as the Robert Bosch Hospital get tested promptly so they can be fit to work for as long as possible – with no risk of infecting others.
Easy application at the point of care
In various laboratory tests with SARS-CoV-2, the Bosch test delivered results with an accuracy of over 95 percent. The rapid test meets the quality standards of the World Health Organization (WHO). A sample is taken from the patient’s nose or throat using a swab. Then the cartridge, which already contains all the reagents required for the test, is inserted into the Vivalytic device for analysis. During the analysis, medical staff can devote themselves to other tasks, for example treating patients. The Vivalytic analyzer is designed to be so user-friendly that even medical personnel who have not been specially trained on it can reliably perform the test. A Bosch Vivalytic analyzer can perform up to ten tests in the space of 24 hours. This means it takes just 100 devices to evaluate up to 1,000 tests per day. Given the dynamic spread of the coronavirus SARS-CoV-2, laboratories are already working beyond capacity. The Bosch Vivalytic will thus help to increase available testing capacities.
Suggested Items
Yamaha Boosts YRi-V AOI Productivity with 3D Component Update
04/22/2025 | Yamaha RoboticsYamaha Robotics Europe SMT Section has introduced instantaneous 3D component update, included with the latest software release for YRi-V automatic optical inspection (AOI) systems, letting users optimise inspection programs without stopping production.
NASA Aims to Fly First Quantum Sensor for Gravity Measurements
04/18/2025 | NASAA lumpy, colorful 3D model of the Earth against a black background, illustrating variations in gravity. North and South America are visible. Red areas show higher gravity, blue areas show lower gravity.
Real Time with... IPC APEX EXPO 2025: Aster–Enhancing Design for Effective Testing Strategies
04/18/2025 | Real Time with...IPC APEX EXPOWill Webb, technical director at Aster, stresses the importance of testability in design, emphasizing early engagement to identify testing issues. This discussion covers the integration of testing with Industry 4.0, the need for good test coverage, and adherence to industry standards. Innovations like boundary scan testing and new tools for cluster testing are introduced, highlighting advancements in optimizing testing workflows and collaboration with other tools.
Saki America, Appoints Mario Ramírez Galindo as Project Engineer in Mexico
04/17/2025 | Saki America,Saki America, Inc., an innovator in the field of automated optical and X-ray inspection equipment, is pleased to announce the appointment of Mario Ramírez Galindo as Project Engineer in Mexico. In this role, Mario will support Saki’s customers by providing technical expertise, process optimization, and project management to enhance manufacturing efficiency and inspection accuracy.
New High Power 3D AXI for Power Electronics from Test Research, Inc.
04/17/2025 | TRITest Research, Inc. (TRI), a leading provider of Test and Inspection solutions for the electronics manufacturing industry, proudly announces the launch of the 3D AXI TR7600HP system. Designed for power semiconductor inspection, the TR7600HP enhances accuracy and efficiency in detecting defects in components such as IGBTs, MOSFETs, SiC inverters, and Paladin Connectors.