Trouble in Your Tank: Can You Drill the Perfect Hole?
It’s Only Common Sense: Your Guide to Better Time Management
Dan's Biz Bookshelf: 'Move Your Bus'
Just Ask Joe: The Occam Process
August 25, 2020 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
First, we asked you to send in your questions for Happy Holden. Now, it’s Joe Fjelstad’s turn! Inventor, columnist, instructor, and founder of Verdant Electronics, Joe has been involved with rigid PCBs and flexible circuits for decades, and he’s ready to share some of his knowledge with our readers. We hope you enjoy “Just Ask Joe.”
Q: Is the Occam process an early version of chiplets, placing chips first in assembly?
A: There have been a number of speculative and prospective chip first package solutions over the last 15–20 or more years. GE, Intel, and others have shown ways of interconnecting chips in packages by plating and then socketing or surface mounting the resulting components on PCBs using solder as almost everything still is today.
Chiplets are a more recent manifestation where chips are tiled and interconnected in mosaic form around the edges using solder. Occam was envisioned as a way to eliminate solder from the manufacturing process by reversing the manufacturing process. That is, building a “component board” comprised ideally of packaged ICs, all having a common grid pitch for terminations and which have been tested and burned in. Circuits are then built up onto the component board as if it was a basic PCB substrate. The component board substrate can be of almost any material because soldering is not required. Aluminum is suggested because it is an excellent thermal conductor and has a CTE near that of copper. Having all components with a common grid makes routing very efficient, and layer counts can drop significantly. Because there is no soldering, there is no unintended thermal damage to components or assembly. With the reduced number of steps, the assemblies should be much less expensive.
To pose your own question for Joe Fjelstad, click here.
Joe Fjelstad is founder and CEO of Verdant Electronics and an international authority and innovator in the field of electronic interconnection and packaging technologies with more than 185 patents issued or pending. To read past "Flexible Thinking" columns or contact Fjelstad, click here. Download your free copy of Fjelstad’s book Flexible Circuit Technology, 4th Edition, and watch the micro webinar series on flexible circuit technology.
Share on:
Suggested Items
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Hands-On Demos Now Available for Apollo Seiko’s EF and AF Selective Soldering Lines
06/30/2025 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is excited to spotlight its expanded lineup of EF and AF Series Selective Soldering Systems, now available for live demonstrations in its newly dedicated demo room.
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
06/26/2025 | Team NCAB -- Column: Fresh PCB ConceptsMicro components have redefined what is possible in PCB design. With package sizes like 01005 and 0201 becoming more common in high-density layouts, designers are now expected to pack more performance into smaller spaces than ever before. While these advancements support miniaturization and functionality, they introduce new assembly challenges, particularly with traditional solder mask and legend application processes.
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.