Sikorsky Awarded Navy Contract to Build Six More CH-53K Heavy Lift Helicopters
October 30, 2020 | PR NewswireEstimated reading time: 2 minutes

Sikorsky, a Lockheed Martin company will build six additional production CH-53K King Stallion helicopters under a new contract for the U.S. Navy. The aircraft will further support the U.S. Marine Corps in its mission to conduct expeditionary heavy-lift assault transport of armored vehicles, equipment and personnel to support distributed operations deep inland from a sea-based center of operations.
The six helicopters are part of 200 aircraft Program of Record for the U.S. Marine Corps, and their addition makes a total of 24 CH-53K production aircraft now under contract. Under the terms of this most recent contract – known as Low Rate Initial Production (LRIP) Lot 4 – Sikorsky will begin deliveries of the six aircraft in January 2024.
"This contract award is a testament to the government's confidence in the CH-53K platform. This award shows that we are working hard to make the aircraft more affordable," said Major General Greg Masiello, program executive office, air ASW, assault and special mission programs. "The capability and affordability of the CH-53K is important to ensure that we provide a valuable addition to the United States Marine Corps and our friends and allies."
King Stallion Production Marches Ahead
The CH-53K program has five aircraft on the line at Sikorsky facilities in Connecticut and over two dozen in various stages of production. The program will deliver the first low rate initial production aircraft in September 2021.
Sikorsky and its suppliers have made significant investments in facilities, machinery, tooling, and workforce training to ramp up production required for the CH-53K program. For example, for the first time, newly installed 10-ton cranes lifted a 12,000 lb. gearbox into a CH-53K production aircraft.
"The production of this CH-53K helicopter represents a new era in capabilities, technologies, safety and mission flexibility for the U.S. Marine Corps. Sikorsky is committed to supporting the Marine Corps to maximize the benefits of this all new helicopter," said Bill Falk, Sikorsky CH-53K program director.
"Pilots are already training on state-of-the art flight training devices to prepare in a safe, cost-effective manner for operational deployment," Falk said.
CH-53K Proving Capabilities
The CH-53K is also nearing the conclusion of the developmental flight test events in preparation for Initial Operational Test & Evaluation (IOT&E), having flown more than 2,000 flight hours validating the aircraft's performance on a ship and in both hot and cold environments. This year, the aircraft completed:
- Air-to-air refueling with an external load
- Initial sea trials
- Flight tests in extremely hot and dusty conditions at U.S. Army Yuma Proving Ground in Yuma, Arizona
Other accomplishments include:
- Maximum weight single-point cargo hook sling load of 36,000 pounds (16,329 kilograms)
- Forward flight speed of over 150 knots
- 60-degree angle-of-bank turns
- Altitude of 18,500 feet mean sea level (MSL)
- 12-degree slope landings and takeoffs
- External load auto-jettison
- Gunfire testing
Suggested Items
Kitron Receives EUR 4 Million Contract for Defense Airborne Radar Application
07/02/2025 | KitronKitron has received an order valued at EUR 4 million to produce electronics modules for airborne radar application, destined for the US market.
Toni Patzner Becomes Global Head of Supply Chain Management at ASMPT SMT Solutions
07/01/2025 | ASMPTOn June 1, 2025, Toni Patzner assumed the position of Global Head of Supply Chain Management. The experienced manager succeeded Jörg Cwojdzinski, who retired after decades of service.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
Excellon Installs COBRA Hybrid Laser at Innovative Circuits
06/23/2025 | ExcellonExcellon is pleased to announce the successful installation of a second COBRA Hybrid Laser System at Innovative Circuits, located in Alpharetta, Georgia. The Excellon COBRA Hybrid Laser System uniquely combines both UV and CO₂ (IR) laser sources on a single platform—making it ideal for high-density prototype and production printed circuit boards (PCBs).