Eltek Continues to Invest, Increase Production Capacity
December 9, 2020 | EltekEstimated reading time: 1 minute

Eltek is excited to announce the new custom-built DES (Develop/Etch/Strip) line, for faster, more precise, and fully Industry 4.0 compliant production line.
All DES modules can be controlled and monitored independently with mobile terminal devices such as tablets or via web browser which improves process control and stability. The new Eltek DES Line can be directly connected to the production monitoring system which ensures traceability of inner layers. The specially designed conveyor enables Eltek to be able to process ultra-thin flex cores and will increase production capacity and yields.
The new DES line etching module was designed particularly for fine line etching which allows Eltek to reach 2 mil Line Space (L/S) and beyond for ultra-thin & high-density PCBs.
Eltek’s new DES line is designed for low power usage and high performance (IE4), reduced chemical consumption and lower environmental pollutant discharge for complete compliance to environmental regulations.
The company is confident that with this new DES line, and Eltek’s continuous investments in our production lines our customers will benefit from enhanced capabilities and leadtimes.
The new DES line is now undergoing testing and certification. It is operating in parallel with the former DES line to maintain full production capacity.
Suggested Items
TTCI Joins Printed Circuit Engineering Association to Strengthen Design-to-Test Collaboration and Workforce Development
07/10/2025 | TTCIThe Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to announce its membership in the Printed Circuit Engineering Association (PCEA), further expanding the company’s efforts to support cross-functional collaboration, industry standards, and technical education in the printed circuit design and manufacturing community.
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.
Webinar Review: A Global Trade and Economy in Flux
07/09/2025 | I-Connect007 Editorial TeamIn a July 8 webinar, Global Electronics Association Chief Economist Shawn DuBravac provided a comprehensive analysis of the evolving international trade environment, its implications for inflation, monetary policy, and labor dynamics, and a sober assessment of market valuations. In “Navigating a Shifting Landscape” DuBravac painted a picture of a global economy in flux, where shifting trade alliances and tariff structures are redrawing the supply chain map and influencing the broader economic landscape, while also conveying an overall bullish market outlook.
Zhen Ding Posts June 2025 Monthly Revenue Report
07/08/2025 | Zhen Ding TechnologyZhen Ding Technology Holding Limited, a global leading PCB manufacturer, reported June 2025 revenue of NT$12,823 million, up 19.68% YoY and up 8.75% MoM, setting a record high for the same period in the company’s history.
Study on Resonance Mitigation in Metallic Shielding for Integrated Circuits
07/08/2025 | Article by Maria Cuesta Martin, Victor Martinez, Vidal Gonzalez Aguado, Würth ElektronikInherent cavity resonant modes often lead to significant degradation of shielding effectiveness, responsible for unwanted electromagnetic coupling. Cavity resonant modes of the metal shielding enclosure can produce two adverse problems: the mutual coupling among different RF modules and shielding effectiveness reduction of the metal enclosure. The cabinets serve to shield certain components from electromagnetic interference (EMI). However, these cavities present some resonance peaks at 5 GHz, making it impossible to use them at higher frequencies.