Defense Speak Interpreted: Is DARPA Still Around After CHIPS?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
Summit Interconnect – Toronto Earns IPC-1791, QML as Trusted Electronics Fabricator
December 14, 2021 | Summit Interconnect, Inc.Estimated reading time: 1 minute
IPC's Validation Services Program has awarded an IPC-1791, Trusted Electronics Fabricator Requirements Qualified Manufacturers Listing (QML) to a Summit Interconnect printed circuit board (PCB) manufacturing facility located in Toronto, Ontario, Canada. This is the first non-U.S. based facility to achieve the IPC-1791 QML.
Following initial audits by IPC, the Toronto facility passed stringent Type 2 fabricator requirements, helping to optimize product quality, reliability, and consistency across the entire manufacturing operations, earning a spot-on IPC’s global network of rigorously vetted, trusted sources. The Toronto facility joins three other Summit Interconnect facilities (Orange, Anaheim, and Santa Clara, Calif.) which were awarded the IPC-1791 QML in October 2021.
Requirements for certification and QML listing to IPC-1791 includes product and quality system, supply chain risk management system (SCRM), security system including compliance to NIST SP 800-171, Export Control Laws (ITAR and EAR), and a chain of custody system (ChoC) review.
Shane Whiteside, president and CEO of Summit Interconnect commented, “Summit Toronto is the first non-U.S. based PCB manufacturer to receive IPC-1791 certification. This trusted fabricator certification augments our existing AS9100 certification, NADCAP accreditation, DD2345 Joint Certification Program status, and ITAR 126.5 compliance in Toronto. Summit is committed to secure printed circuit board manufacturing to support the increasing needs of our U.S. and allied military customers. These certifications coupled with the capabilities and capacity available in Toronto underscore our commitment to being the trusted PCB supplier of choice for military systems and platforms.”
IPC's Validation Services QPL/QML Program was developed to promote supply chain verification and recognition. It also provides auditing and qualification of electronics companies' products and identifies processes which conform to IPC standards. The IPC-1791 QML verifies security systems and recognizes companies for either trusted electronic designer, fabricator, or assembler ensuring a high level of integrity.
"IPC's Validation Services Audit Programs uniquely provide technical and in-depth assessments of products and processes in accordance with IPC standards," said Randy Cherry, IPC director of Validation Services. "We are pleased to especially recognize Summit Interconnect Toronto, Ontario on becoming members of IPC's network of trusted QML suppliers."
Share on:
Suggested Items
IPC Rebrands as Global Electronics Association: Interview With Dr. John W. Mitchell
06/22/2025 | Marcy LaRont, I-Connect007Today, following a major announcement, IPC is embracing the rapid advancement of technology with a bold decision to change its name to the Global Electronics Association. This name more accurately reflects the full breadth of its work and the modern realities of electronics manufacturing. In this exclusive interview, Global Electronics Association President and CEO Dr. John W. Mitchell shares the story behind the rebrand: Why now, what it means for the industry, and how it aligns with the organization’s mission.
Global Electronics Association Debuts; New Name Elevates IPC’s 70-Year Legacy as Voice of $6 Trillion Electronics Industry
06/25/2025 | Global Electronics AssociationToday begins a new chapter for IPC as it officially becomes the Global Electronics Association, reflecting its role as the voice of the electronics industry. Guided by the vision of “Better electronics for a better world,” the Global Electronics Association (electronics.org) is dedicated to enhancing supply chain resilience and promoting accelerated growth through engagement with more than 3,000 member companies, thousands of partners, and dozens of governments across the globe.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/20/2025 | Andy Shaughnessy, I-Connect007It’s been a busy week in this industry, and we have news and articles from the PCB design, fabrication and assembly communities. Some of this news is out of this world. We may be losing the high ground—the really high ground. Columnist Jesse Vaughan explains how the U.S. seems to be falling behind in space, and how this could affect our ability to defend ourselves in the future. We have an update on the U.S.-China tariff talks, which seem to be moving forward, though sometimes at a snail’s pace.
New IPC VP Joe Schneider Building Stronger Focus on U.S., Canada
06/19/2025 | Marcy LaRont, I-Connect007IPC has hired Joe Schneider as a vice president to strengthen its regional focus and address the specific needs in the U.S. and Canada. Joe brings a rich background in OEM and contract manufacturing, including with industry giants like Siemens and Abbott Laboratories. In this interview, he shares his vision for the region, which emphasizes workforce development and supply chain challenges.
IPC Update on the Latest U.S.– China Trade Announcement
06/18/2025 | IPCOn June 12, the Trump Administration announced an agreement to implement the framework of the trade deal with China reached earlier in May. Reports indicate the following high-level terms: A 55% combined tariff on imports from China, 10% “reciprocal” tariffs under the International Emergency Economic Powers Act (IEEPA), 20% IEEPA-based fentanyl tariffs, and Existing Section 301 tariffs, which in many cases are 25%.