American Made Advocacy: Success in Washington Requires Patience, Persistence, and Sustained Focus
The Government Circuit: News on Defense Electronics, Europe, and Sustainability
Defense Speak Interpreted: SWaPing Nanosatellites for Defense Systems
Call-for-Participation Webinar: iNEMI Electromigration of SnBi Solder for Second-Level Interconnect Project
January 7, 2022 | iNEMIEstimated reading time: 1 minute
The low melting temperature of SnBi alloys (138°C) makes them attractive for assembling thermally warpage-prone high-density microelectronic packaging. However, Bi has a high propensity for electromigration and segregation at the anode under high current density conditions. This can lead to potentially brittle solder joints with high electrical resistance over time in the field. There is a need to mitigate this shortcoming and develop SnBi solder joints that maintain their performance and reliability over the product life. This iNEMI project will explore the potential to reduce electromigration in low-height solder joints by taking advantage of mechanical and/or chemical back stresses.
Objective
The overall project objective is to determine the boundaries of the envelope formed by joint height, temperature, current density and PCB finishes within which the solder joint will operate reliably over the product life.
The project has multiple phases planned. The first phase will:
- Establish an appropriate test vehicle for electromigration study of solder joints, including a convenient means of achieving various joint heights.
- Investigate the role of back pressure in reducing electromigration in eutectic SnBi solder joints by determining the rate of electromigration of SnBi solder joints with and without diffusion barriers as a function of current density, temperature and joint height.
The Electromigration of SnBi Solder for Second-Level Interconnect project is open for sign-up until January 31, 2022. Two call-for-participation webinar sessions are scheduled to introduce the project. These webinars are open to industry; advance registration is required.
Registration
Tuesday, January 11, 2022
10:00-11:00 a.m. EST (Americas)
3:00-4:00 p.m. CET (Europe)
11:00-12:00 p.m. CST (China)
Register for this webinar
Thursday, January 13, 2022
9:00-10:00 a.m. CST (China)
8:00-9:00 p.m. EST (Americas) on January 12
Register for this webinar
Share on:
Suggested Items
SolderKing to Highlight Innovations in Soldering and Manufacturing Efficiency at Southern Manufacturing & Electronics 2025
01/08/2025 | SolderKing Assembly Materials Ltd,SolderKing, a leading UK manufacturer of advanced soldering materials and consumables, will be exhibiting at the Southern Manufacturing and Electronics Show from 4-6 February 2025 at the Farnborough International Exhibition Centre, Stand J90.
Altus Highlights Heller Industries Advances in Void Reduction Under 1%
01/06/2025 | Altus GroupAltus Group, a leading distributor of capital equipment in the UK and Ireland, emphasises the importance of reducing voids in reflow soldering to improve manufacturing efficiency and product reliability
IPC Announces UK Regional Qualification for Hand Soldering Competition
01/02/2025 | IPCIPC invites skilled soldering experts to participate in the UK Regional Qualification for the IPC Hand Soldering Competition (HSC) on February 4-6, 2025, at the Farnborough International Exhibition Centre.
Connect the Dots: Designing for Reality—Solder Mask and Legend
01/02/2025 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we discussed the strip, etch, and strip process. At this point, we have a functioning board, but we still need to protect the PCB from environmental effects and document the circuit components. This brings us to the solder mask and legend phase of production.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.