It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Candor Nails the ROI With InduBond
June 7, 2022 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
Nolan Johnson follows up on his original interview with Sunny Patel, engineering manager at Candor Industries, about the economics of this new InduBond X-Press 360 lamination press. It sounds like Sunny has hit the “easy” button with the installation of this machine.
Nolan Johnson: You recently installed the InduBond X-Press 360 lamination press. There’s a lot of hype and promise around this particular technology regarding energy savings and versatility. What are your impressions in using this press?
Sunny Patel: Well, the hype is real. It’s such a great machine. Because of its simplicity and the flexibility of use, I find it a lot easier to work with than our previous press. The energy savings speak for themselves; the capabilities of going up to 375°C and 65 kg/cm2 pressure allows us to do pretty much any kind of pressing. The name of the game right now is to try to increase your available capabilities; the press does that without many difficulties. You don’t need a PhD on the machine and it’s very easy to use. We’re very happy with it.
Johnson: That’s great to hear. Capabilities and energy use are two of the things that are significantly better. Is there a positive impact on throughput?
Patel: Yes. The system that we used before was a good system. But the nice thing about the InduBond is you can control both the heating and the cooling. Because everything is so dialed in, the time we used to take to wait for the cooling has dramatically decreased. There’s a lot of throughput increase as well, not only on that side, but also the layout process, because previously we had used a continuous copper foil lamination system. Other people may not have the same problem; they would have problems with pinning. Our headache may not have been pinning, but other board shops may find this a lot easier because it’s a pinless system.
You don’t have to move around bulky press plates. Just build your book, put in your stainless steel, and just keep stacking; it’s simple to do. I can do it and I never ran a press before this one. Overall, throughput has increased, just because of the capability. The smaller your press stack is, the faster you can heat up because there’s less load. You can even do the small quick-turns pretty fast.
Johnson: Have you had a chance to put together some numbers on how the operating costs have changed? For example, you said that the energy savings are dramatic. What are the numbers?
Patel: I don’t have the numbers in front of me, but I believe I calculated one press before to be $40 or $50 a lamination press cycle. Now it’s around $5. If you add up all the presses, it’s quite a significant savings. Not only that, but we’re using less copper. And because the layout is easier, we’re saving on time.
To read this entire conversation, which appeared in the May 2022 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.