The Chip Shortage Leads to Innovation
October 3, 2022 | Malcolm Thompson, NextFlexEstimated reading time: 2 minutes
The chip shortage is by no means over, with estimates expecting it will last into 2023. Some could see it taking even longer, such as Intel CEO Pat Gelsinger, who expects it to see shortages into 2024 due to those now impacting electronics production equipment. But if there’s any bright spot to be had, it’s that a crisis often leads to long-term solutions. In this case, it’s the increase in government funding for semiconductor production in the United States. Once the CHIPS Act proceeds, we can significantly accelerate building semiconductor fabs in the United States and work toward preventing future chip shortages that would put us back into our current situation.
In Every Challenge, There Is Opportunity
The impact of the chip shortage on automotive production and consumer electronics has highlighted the importance that electronics now play in our lives, from lawmakers to everyday consumers. The ongoing disruptions to chip supply and production have rippled through broad parts of medical, industrial, defense, and aerospace. Everstream data now says the average lead time for advanced chips is 52 weeks. This is a problem that affects us all. Thankfully, because of this broad impact, lawmakers and industry members have recognized that the chip shortage goes beyond just silicon foundries.
To solve the overall problem, investment in wafer foundries must be accompanied by funding for advanced packaging of the chips that will come from the new foundries being supported by the CHIPS Act. Without that additional capability, many of these new chips will be sent overseas for packaging, which would defeat the bill’s purpose of boosting domestic chip production overall. Thankfully, this is communicated in the CHIPS Act, and is getting more focus from players across the electronics industry.
While there is concern that the big players in advanced packaging will suck up all the funding, there’s hope that additional complementary and novel approaches such as additive manufacturing will also see meaningful investment. Even a small portion of the overall budget planned for advanced packaging can go a long way in the hands of nimble, innovative companies that, when working together, can raise the bar for everyone in the electronics industry.
We Must Innovate Now, Or We’ll Be Here Again
Collectively, we need to get serious about forming teams, writing proposals, and expanding the electronics space to encompass emerging technologies like additive electronics and flexible hybrid electronics (FHE), because we know other countries are pursuing new ways to create new classes of electronics, and have already made significant headway. Today there is limited semiconductor packaging in the U.S., with early funding intended to go into heterogenous integration methodologies at large companies. The inclusion of investment in additive electronic interconnect packaging would be complementary and could have an impact on a broad set of businesses in the supply chain.
To read this entire article, which appeared in the September 2022 issue of PCB007 Magazine, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Magnalytix's Services and Trends in the Electronics Industry
05/10/2024 | Real Time with...IPC APEX EXPOMike Bixenman, president of Magnalytix, explains Magnalytix's services, including third-party validation, test boards, electrical testing, and comprehensive reports. He also discusses emerging trends such as power electronics and reliability. Standards and design improvements also form part of this conversation.
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
KYZEN’s Adam Klett to Keynote at SMTA Electronics in Harsh Environments Conference
05/07/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, announced today that KYZEN’s Director of Science, Adam Klett, PhD will present as a keynote speaker at the SMTA Electronics in Harsh Environments Conference. The event is scheduled to take place May 14-16, 2024 at the Technical University of Denmark in Copenhagen, Denmark.
Altus Equips SSTL with Advanced Cleaning Technology for Electronics
05/07/2024 | Altus GroupAltus Group, a leading supplier of capital equipment for the electronics manufacturing industry, has announced the successful installation of an advanced PCBA cleaning system at Surrey Satellite Technology Limited (SSTL).