Defense Speak Interpreted: Is DARPA Still Around After CHIPS?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
Revolutionizing Radar Signal Processing
November 1, 2022 | DARPAEstimated reading time: 1 minute
Radar systems have seen many technology improvements in apertures (antennas) and associated hardware and software since the nascent operational versions in World War II. What hasn’t changed significantly over the decades, however, is that radars still use linear signal processing between the aperture and the detector. In the 1940s linear radar signal processing used vacuum tubes and analog circuits, while current radars accomplish linear signal processing digitally with microchips and software.
With the Beyond Linear Processing (BLiP) program, DARPA’s goal is to improve radar performance by applying innovative signal processing methods. BLiP will leverage high-power computer processing to explore new, non-linear and iterative signal processing techniques that could lead to lighter, smaller, and less expensive – but equally capable – radar systems. If successful, BLiP would enable the same radar performance achieved on large platforms today on much smaller sea, air, and ground platforms.
“A lot of radar improvements over the past 30 years have focused on growing the size of the aperture for greater sensitivity or increasing transmitter power,” said Frank Robey, BLiP program manager in DARPA’s Strategic Technology Office. “Those are important, but if we want to shrink aperture size by 50% and still get the same radar performance then we need to disrupt the linear signal processing paradigm. With the tremendous increases in computer processing power available today, we can take a fresh look at radar signal processing and explore iterative, leap-ahead techniques.”
BLiP will address the current immaturity of non-linear and iterative signal processing methods. Over the course of the two-year program, end-to-end radar signal processing chains will be developed, analyzed, implemented and tested – initially through non-real-time laboratory testing and culminating in real-time implementation and full-scale field testing using an operational National Weather Service radar. Key technical challenges for BLiP will be the development, understanding, and optimization of the signal processing chain, and the practical aspects of implementing BLiP algorithms using real-time, high-performance processing.
Share on:
Suggested Items
Standard of Excellence: Delivering Excellence—A Daily Goal
06/25/2025 | Anaya Vardya -- Column: Standard of ExcellenceDelivering excellence consistently across all touchpoints is essential for organizations aiming to build trust, foster customer loyalty, and maintain their brand reputation. This requires a strategic approach encompassing uniform messaging, standardized service protocols, employee training, performance monitoring, and seamless integration across platforms.
Global PCB Connections: Embedded Components—The Future of High-performance PCB Design
06/19/2025 | Jerome Larez -- Column: Global PCB ConnectionsA promising advancement in this space is the integration of embedded components directly within the PCB substrate. Embedded components—such as resistors, capacitors, and even semiconductors—can be placed within the internal layers of the PCB rather than mounted on the surface. This enables designers to maximize available real estate and improve performance, reliability, and manufacturability.
Nordson Electronics Solutions Develops Panel-level Packaging Solution for Powertech Technology, Inc. That Achieves Yields Greater Than 99% for Underfilling During Semiconductor Manufacturing
06/11/2025 | Nordson Electronics SolutionsNordson Electronics Solutions, a global leader in reliable electronics manufacturing technologies, has developed several solutions for panel-level packaging (PLP) during semiconductor manufacturing. In one particular case, Nordson’s customer, Powertech Technology, Inc. (PTI) saw underfill yields improve to greater than 99% as they plan to transition from wafers to panels in their manufacturing operations. edwd
Keysight, Synopsys Deliver an AI-Powered RF Design Migration Flow
06/06/2025 | BUSINESS WIREKeysight Technologies, Inc. and Synopsys, Inc. introduced an AI-powered RF design migration flow to expedite migration from TSMC’s N6RF+ process to N4P technology, to address the performance requirements of today’s most demanding wireless integrated circuit applications.
AMD Acquires Brium to Strengthen Open AI Software Ecosystem
06/05/2025 | AMDAt AMD, we’re committed to building a high-performance, open AI software ecosystem that empowers developers and drives innovation. Today, we’re excited to take another step forward with the acquisition of Brium, a team of world-class compiler and AI software experts with deep expertise in machine learning, AI inference, and performance optimization.