Skin-like Electronics Could Monitor Your Health Continuously
November 17, 2022 | Business WireEstimated reading time: 1 minute

Flexible, wearable electronics are making their way into everyday use, and their full potential is still to be realized. Soon, this technology could be used for precision medical sensors attached to the skin, designed to perform health-monitoring and diagnosis. It would be like having a high-tech medical center at your instant beck and call.
Such a skin-like device is being developed in a project between the U.S. Department of Energy’s (DOE) Argonne National Laboratory and the University of Chicago’s Pritzker School of Molecular Engineering (PME).
Worn routinely, future wearable electronics could potentially detect possible emerging health problems even before obvious symptoms appear. The device could also do a personalized analysis of the tracked health data while minimizing the need for its wireless transmission.
Such a device would need to collect and process a vast amount of data, well above what even the best smartwatches can do today. And it would have to do this data crunching with very low power consumption in a very tiny space.
To address that need, the team called upon neuromorphic computing. This artificial intelligence (AI) technology mimics operation of the brain by training on past data sets and learning from experience. Its advantages include compatibility with stretchable material, lower energy consumption and faster speed than other types of AI.
The other major challenge the team faced was integrating the electronics into a skin-like stretchable material. The key material in any electronic device is a semiconductor. In current rigid electronics used in cell phones and computers, this is normally a solid silicon chip. Stretchable electronics require that the semiconductor be a highly flexible material that is still able to conduct electricity.
The team’s skin-like neuromorphic “chip” consists of a thin film of a plastic semiconductor combined with stretchable gold nanowire electrodes. Even when stretched to twice its normal size, their device functioned as planned without formation of any cracks.
As one test, the team built an AI device and trained it to distinguish healthy electrocardiogram (ECG) signals from four different signals indicating health problems. After training, the device was more than 95% effective at correctly identifying the ECG signals.
Exposure to an intense X-ray beam revealed how the molecules that make up the skin-like device material re-organize upon doubling in length. These results provided molecular-level information to better understand the material properties.
Suggested Items
Investment in High-Tech Manufacturing: Zollner Opens Cleanroom in Hungary
03/28/2025 | Zollner Elektronik AGIn a ceremonial event on March 13, 2025, representatives from ASML and Zollner inaugurated the new cleanroom at the Hungarian site in Vác. Among those present were Wayne Allan, Chief Strategic Sourcing & Procurement Officer, and Member of the Board of Management at ASML, Michiel Claessens.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/28/2025 | Andy Shaughnessy, I-Connect007I’ve spent my week recovering from a busy and interesting week in Anaheim for the 25th IPC APEX EXPO. I think back to my first APEX EXPO, and the changes since then are too numerous to count. I first attended in 2004, also in Anaheim, back when there was almost no design content in the conference or expo portions of the show. It was just a few years after the downturn, and attendees and exhibitors alike were skittish, almost afraid to show confidence in our industry. A few unemployed design friends handed out copies of their resumes. Travel budgets were still down, and the aisles weren’t exactly packed with traffic.
Real Time with... IPC APEX EXPO 2025: MKS' Atotech—Leading Innovations in Semiconductor Solutions
03/28/2025 | Real Time with...IPC APEX EXPOIn this interview, Marcy LaRont speaks with Kuldip Johal, CTO, MKS’ Atotech. Based in Boston, MKS operates in vacuum solutions, photonics, and specifically for the Atotech division, material solutions. MKS significantly impacts the semiconductor industry, supplying components for up to 85% of global semiconductor tools and covers processes and materials for 70% of PCB manufacturing steps.
EIPC Summer Conference 2025: Call for Distinguished Speakers in Edinburgh
03/26/2025 | EIPCThe European Institute of Printed Circuits (EIPC) is pleased to announce its Summer Conference 2025, scheduled for June 3-4 in the historic city of Edinburgh, Scotland.
Global PCB Connections: A Field Engineer’s Perspective on the Top 10 Trends to Watch
03/27/2025 | Jerome Larez -- Column: Global PCB ConnectionsAs a field application engineer for a major Chinese PCB company, I see firsthand the challenges and, more excitingly, the trends shaping our industry. Talking to engineers, designers, and procurement teams worldwide, one thing is clear: PCBs have come a long way, but we’re barely scratching the surface of what’s possible. Here are 10 trends I believe will define our industry over the next decade.