It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
MKS Discusses the Cutting Edge of Technology
December 20, 2022 | Nolan Johnson, I-Connect007Estimated reading time: 3 minutes
During a recent tour of the MKS facility in Beaverton, Oregon, I met with Todd Templeton, Chris Ryder, Kyle Baker, and Martin Orrick. As a reminder, MKS acquired ESI in 2019 and has retained the ESI brand. In this interview, they explain their approach to HDI and ultra HDI, the current state of base materials, and what the future looks like on the cutting edge of technology.
Nolan Johnson: Todd, what are you seeing in the market and what’s happening with your customers? What are the dynamics and what are their pain points?
Todd Templeton: When it comes to HDI, we have seen a big shift in historical spending recently, with a lot more investment into the IC substrate space. In 2019, we introduced the Geode™ drilling system, primarily targeted at the HDI market. Since then, we’ve heard customers say, “That’s great, but what can you do for me over here in IC substrate?” Therefore, we’re looking at ABF (Ajinomoto Build-up Film) substrates and investing more heavily to meet customer demand.
Chris Ryder: We’re expanding the Geode CO2 via drilling system into that IC substrate space, and it has turned out to be an excellent modular platform for a broad range of applications. It has worked well in adopting and adapting into various rigid panel products. The Geode via drilling system already has quite a breadth of range from standard commodity HDI products to mSAP and SLP substrates, but these are all copper-clad materials. Hence, we’ve been evolving and adapting the platform toward an additional ABF-specific configuration for the FCBGA market with a future plan to expand in that market.
To be clear, we already serve some portion of the ABF-based market with the higher end of the Geode via drilling system configurations, but there’s effort to focus more specifically on that product range and market segment. As we move forward, we’ll certainly be sharing more details.
Johnson: Are you finding more willingness to invest uniformly across the globe?
Templeton: Yes, we’re seeing it all over. It’s not regionally dependent. As Chris was saying, we have a solid platform with our products to address the HDI and mSAP markets, but our customers are saying, “Our investment has increasingly shifted to IC substrate; do you have a solution for me there?” With some minor adjustments to our system architecture, we can have a compelling product in that space. It has been driving some of our development and focus in the rigid panel space. When it comes to flex, we have multiple legs of the stool that support demand for our products.
Johnson: When the pandemic started, you had a good idea that those applications would lead the way. Has that shifted and changed?
Templeton: Has it changed? Primarily, that time was driven by 5G. We were looking to make sure everything had the right components, such as antennas, the bay stations, etc. I don’t think that it’s shifted much since then.
Ryder: The pandemic created more demand for high-power, high-performance computing, or “HPC.” That’s certainly been a driver behind the FCBGA and ABF upward trend. Development in this market was there before the pandemic, but the focus has grown and accelerated demand since.
Johnson: As well as the cloud-based data centers, and core streaming content?
Ryder: Yes. Servers, HPC, and data centers have definitely seen growth. There has been an uptick in demand over the last couple of years. On the other hand, our customers have become more thoughtful about which technologies to invest in, as well as the timing of these investments. This has somewhat changed the technology adoption pace of the past decade or so.
Johnson: It would seem to imply it’s slowing down and getting conservative.
Ryder: Not necessarily. Manufacturers are looking to react more swiftly to present trends vs. second guessing long-term trends. Our customers, for example, are looking for shorter lead times on our equipment to facilitate more timely decisions on when to execute for product integration, product implementation, and time to market. There have been some areas in the industry where we’ve succeeded by having a quicker response to those demands. When customers decide to pull the trigger on a project, they can’t deal with a one-year lead time for a manufacturing tool. Our agility has been beneficial for us.
To read this entire conversation, which appeared in the November 2022 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.