Garry McGuire: Aiming for the Stars
March 27, 2023 | Patty Goldman, I-Connect007Estimated reading time: 1 minute
Garry McGuire of the Jacobs Space Exploration Group at Marshall Space Flight Center in Huntsville, Alabama, reflects on the serendipitous moment that led to a leadership role at IPC and the enduring relationships he’s built through his participation in the organization. With the rapid advance of technology constantly pushing the industry forward, Garry urges newcomers to jump in and experience all IPC has to offer.
Garry, congratulations on receiving the Hall of Fame Award, the highest award that IPC gives to their volunteers. What was it like getting that phone call from John Mitchell?
It was a big surprise. When I first picked up the phone, I had that anxious feeling you’d get when you got called to the principal’s office for doing something bad—but then it turned out to be a great surprise.
I’ll bet. What got you involved in IPC? When did all that happen?
In the early ‘90s, I was supporting NASA at Goddard Space Flight Center; my main role there was to support our customer by developing and maintaining NASA’s workmanship standards. In 1994, Admiral Perry released an acquisition reform memo directing government agencies to stop using their internal standards and to look for voluntary consensus standards where possible. At NASA, we began looking outside the organization to see what options we had to get rid of for our internal soldering and cabling standards, etc. Before that moment, we’d known a little about IPC, but after that decision by the Admiral we started taking a more serious look at them and found them to be a good fit. We started going to the semiannual IPC meetings, probably in 1995 or ‘96; I’ve been active in IPC since then.
That transition actually became part of my job description which is when I fully engaged with the IPC which lead to the work on the initial release of the J-STD-001 space addendum around 2000.
To read this entire conversation, which appeared in the 2023 edition of Show & Tell Magazine, click here.
Suggested Items
IPC Focuses on Education and Onboarding
05/09/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with Carlos Plaza, senior director of education for IPC, about expanding educational efforts in the PCB design, fabrication, and assembly segments. As Carlos explains, PCB design is a hot topic, but onboarding may be the hottest one of all.
Real Time with… IPC APEX EXPO 2024: Industry Growth, Challenges, and Technological Advancements
05/09/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Shawn DuBravac, IPC chief economist, dive into key industry topics such as growth, challenges, and technological advancements. They discuss shifts in the global competitive landscape, downstream demand, customization, and how AI is enhancing human skills. The industry outlook appears promising for both the short and long term.
Real Time with… IPC APEX EXPO 2024: The Driving World of e-Mobility with Indium
05/08/2024 | Real Time with...IPC APEX EXPOIn the competitive EV market, technology plays a crucial role facing the challenges of infrastructure. As Brian O'Leary explains, Indium's e-Mobility product suite includes proven solder and thermal management products for high reliability.
Real Time with… IPC APEX EXPO 2024: Understanding Objective Evidence in Manufacturing Processes
05/07/2024 | Real Time with...IPC APEX EXPOGraham Naisbitt explains the importance of objective evidence in manufacturing processes, debunking the common misconception that the ROSE test is a cleanliness test. He also discusses the introduction of Rev J, a requirement for measuring ionic contamination on circuit assemblies, and the challenges in accurately measuring contamination. Alternative methods like ion chromatography and the need for updating standards like the ROSE test are mentioned.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.