DownStream Discusses Rigid-flex and DFM Trends
May 2, 2023 | Kelly Dack, CID+, EPTACEstimated reading time: 3 minutes
I recently sat down with Joe Clark, founder, and Ray Fugitt, technical marketing manager, of DownStream Technologies to discuss trends in tool design and manufacturing, including rigid-flex design and refreshed graphical user interfaces (GUI).
Kelly Dack: Gentlemen, thanks for speaking with me. Let's talk about design for manufacturability (DFM) trends and how your tools play into these.
Joe Clark: The biggest trend that we're seeing now, and the one we're highlighting in our products, is the proliferation of rigid-flex design. It presents challenges, from documentation of multiple stackups and zones to DFM analysis. Many of our customers are asking how they use these tools to solve problems that they’re dealing with now.
Dack: Ray, tell us how this plays into DFM from the standpoint of both the designer and the manufacturer.
Ray Fugitt: Thanks. My background is in rigid, so rigid-flex has been a learning process for me. Our last two releases are dedicated to flex and rigid-flex designs. We work with some large OEMs that do rigid-flex every day. We basically borrowed the rules and challenges that they’re seeing and incorporated them into our DFM tool.
Dack: When designers are setting up DFM rules and constraints in design tools or analysis software, they often ask, “What constraints do we enter? How do we find the design and manufacturing constraints for setting the tool?” So, do they come from the board supplier or are there general specifications?
Fugitt: Funny, I thought they’d ask whether the constraints come from the design rules or the fabricator. It's not an either/or situation. Basically, with our tool, you can choose to set and run it against your own internal design rules or your fabricator’s capabilities. We actually include a real-world example of design for assembly (DFA) from an American board shop, and we include that in our software. It's a starting point and then you work from there.
Dack: Very good. And let's talk about what else you are working on now.
Fugitt: Sure. BluePrint is our documentation tool. If you think about all the documentation that goes along with doing a PCB design, our existing competition for this tool is actually all the workarounds that people have devised over the years. There's no other tool out there that does what this does. We automate the creation of PCB documentation. You bring in the design, and a lot of your documentation is done right there. Then, you just work with the rest of it.
CAM350 and DFMStream are our analysis tools. As you probably know, CAM350 has a had a long history in the PCB fabrication sector. It's grown throughout the years and has transitioned to also become a very robust and powerful analysis tool, although it still does fabrication very well. But it mainly does things like DFM, design compares, netlist compares, and other things to address common problems earlier in design chain.
We recently held a user group meeting, and it was well attended. We talked about some of its newer features, such as its more modern interface. This new GUI came around a few years ago, and we continue to evolve it. We put in a new graphic engine to make it redraw quicker. We addressed some of the more aggravating things that happen when you're using a tool like this. We've done as much as we can to make this tool a lot more powerful.
Dack: Ray, you’ve been posting a lot of helpful online videos.
Fugitt: Yes. I'm a YouTube personality. I have almost 500,000 hits on YouTube.
Dack: You are indeed! You're a social media influencer. Not quite like Elon Musk, but you influenced me, and in a good way.
Fugitt: Glad I could help.
Dack: Very good. It’s been great speaking with you gentlemen.
Clark: Thanks, Kelly. It’s always a pleasure.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Magnalytix's Services and Trends in the Electronics Industry
05/10/2024 | Real Time with...IPC APEX EXPOMike Bixenman, president of Magnalytix, explains Magnalytix's services, including third-party validation, test boards, electrical testing, and comprehensive reports. He also discusses emerging trends such as power electronics and reliability. Standards and design improvements also form part of this conversation.
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
EMA Webinar: Next Generation MCAD/ECAD for SOLIDWORKS
05/09/2024 | EMA Design AutomationLearn how the MCAD and ECAD experts at Hawk Ridge and EMA can help you solve your MCAD/ECAD integration challenges with this unique collaboration environment.
Sondrel Awarded New Video Processor ASIC Design and Supply Contract
05/09/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips for leading global technology brands, is pleased to announce that it has won a major ASIC design and supply contract for a next generation, video processing chip.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.