U.S. Navy, Lockheed Martin Successfully Test Key Capabilities of Advanced Off-Board Electronic Warfare System
December 12, 2023 | Lockheed MartinEstimated reading time: 2 minutes
Lockheed Martin supported a successful government test of the Advanced Off-Board Electronic Warfare (AOEW) system’s electronic attack capabilities while installed on a U.S. Navy MH-60R helicopter. This marked the first time in the program’s development the system was able to perform engagement testing, demonstrate the ability to defeat threats, and quantify system performance, while integrated and controlled by the target platform.
In partnership with the U.S. Navy at Naval Air Station Patuxent River in Maryland, this integration event tested the capabilities of the system and operability on the MH-60R helicopter platform. While the system is designed for both the MH-60R and MR-60S host platforms, only the MH-60R was used for this test.
Strategic Perspectives
“The AOEW system is one of the most advanced, complex electronic warfare systems ever developed,” said Deon Viergutz, vice president of Spectrum Convergence at Lockheed Martin. “AOEW is a force multiplier for our Sailors that will help them dominate and control the battlespace without ever firing a single shot. It is designed with evolutionary capabilities, set up to be completely programmable so that it can develop, deliver and deploy new techniques as the threat landscape changes.”
Dive Deeper
AOEW is a pod-based electronic warfare missile defense system that will provide U.S. Navy with enhanced electronic surveillance and attack capabilities against anti-ship missile threats. To date, the system has successfully undergone a series of incremental developmental and operational tests at Lockheed Martin’s facility in Syracuse, New York.
- AOEW can be fully integrated with Aegis Baseline 9C.2+ and the Surface Warfare Electronic Warfare Improvement Program Block II.
- The system can work independently or with other systems onboard ships and other assets.
- AOEW leverages open-systems architected solutions, allowing for rapid upgrades, interoperability, reduced lifecycle costs and prompt insertion of new hardware.
- The architecture and technologies of AOEW lay the groundwork to deliver similar capabilities on other assets such as small ships or unmanned aerial and surface vehicles.
What’s Next
More tests and demonstrations of the AOEW pod on host platforms are planned in 2024. The team will use the results to continue to refine system performance. Currently, AOEW is under a low-rate initial production contract and deliveries of the first AOEW units are expected in the next year.
Suggested Items
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.
IBM, RIKEN Unveil First IBM Quantum System Two Outside of the U.S.
06/24/2025 | IBMIBM and RIKEN, a national research laboratory in Japan, today unveiled the first IBM Quantum System Two ever to be deployed outside of the United States and beyond an IBM Quantum Data Center.
Excellon Installs COBRA Hybrid Laser at Innovative Circuits
06/23/2025 | ExcellonExcellon is pleased to announce the successful installation of a second COBRA Hybrid Laser System at Innovative Circuits, located in Alpharetta, Georgia. The Excellon COBRA Hybrid Laser System uniquely combines both UV and CO₂ (IR) laser sources on a single platform—making it ideal for high-density prototype and production printed circuit boards (PCBs).