RoBAT Brings TDR Test to Bare and Assembled PCBs
February 19, 2024 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 4 minutes
When most people in this industry think of time domain reflectometry (TDR), they envision an electrical engineer running signal integrity simulation on a high-speed PCB during the design cycle. But RoBAT has flipped the script, migrating this SI functionality downstream with a range of automatic TDR testers for bare and assembled boards.
In an interview at DesignCon, Gregory Miczek, global applications manager with RoBAT, discussed the company’s background and its expansion path from backplane defect analyzers to TDR testers for high-tech bare and assembled boards.
Andy Shaughnessy: Gregory, tell us about RoBAT and how you all wound up moving TDR downstream from its usual spot in the development cycle.
Gregory Miczek: Sure. RoBAT started back in 2001 as a core test electronics company dedicated to the design and manufacture of automatic test equipment specifically for backplanes. We were doing shorts and continuity tests primarily on a proprietary machine, developed to test multiple signals by taking a robotic head and plugging into connectors on a board to tell whether they're connected in the right place, and that sort of thing.
We tested shorts and continuity for years, and we made our robotic manufacturing defect analyzers an industry standard and sold many machines around the world. But as technology in the backplane industry evolved, we saw speeds and data rates constantly increasing to the point that now shorts and continuities were no longer enough of a test.
So, we adapted our robotic test machine to add signal integrity test capability. We started by repackaging somebody else's TDR system into our system. We then went through a series of iterations to progressively reduce the cable length. With each iteration, there was a continuous improvement to the TDR resolution. We reached a point where the limiting factor was the existing TDR measurement systems on the market. So, we developed and tuned our own TDR unit packaged specifically for carrying the measurement unit around on our robotic head. The latest generation has the TDR measurement ports at the interface to our tooling to connect to the board under test. Now, our rise time and signal loss through our interface is as small as you can possibly get. We don't think we can actually get it any better. At that time, our machines had been designed to find faults created during the assembly process using TDR.
However, we soon realized the machine was not only finding assembly-related faults but also ones created in the fabrication of the bare board. In fact, it found more bare fab manufacturing faults than assembly-related faults. It was clear to us at this point that we should develop a version of the machine to test bare fabs. The goal was a machine that retained the ability to make multiple connections (up to x24) to the PCB in one insertion and, therefore, make it possible to test 100% of the high-speed nets in a production test environment. We have designed high-speed impedance-controlled compliant tips to contact the bare fab, which can be configured to match any pad/hole layout. At this point, because we've packaged it this way, we can also adapt this to any configuration of bare printed circuit board in the high-speed test realm. What we are primarily looking for are backdrill depth discrepancies, slivers, impedance variations and skew
Shaughnessy: This type of tester could work in the IC realm as well, right?
Miczek: Yes, correct, we have versions of the latest RoBAT Scara machines that will test assembled backplanes and line cards as well as bare fabs. We actually test all the way out to ASICs and FPGAs, and we're starting to find faults with ASICs on the customers’ line cards that they had no way to ever find before because they didn't even know these faults existed. I work with our customers closely, and now they're telling us what they're finding. It's really fascinating.
Shaughnessy: That’s great. Your customers are doing R&D for you because the tool has so many potential uses.
Miczek: That’s right. We've been blessed with a great core group of primary customers. We have historically sold primarily to contract manufacturers. However, we have some OEM customers who have heard about our equipment. One customer in Toronto bought our equipment just to test their own products, and they are having great success testing bare line cards measuring each signal from both ends. In a fully populated line card, we can't access the SMT end of the net, but testing prior to SMT installation, we can access the end of the net from the bare SMT pads, for example, on a BGA array. In the fully populated configuration, we make tooling to fit the size of the daughter card connector, for example, a 16-way version, each with a dedicated TDR measurement channel. This allows us to test every single signal from the connector side and tell you that the ASIC is now faulty from a TDR perspective.
Shaughnessy: This qualifies as a game-changer, I’d say.
Miczek: We think so.
Shaughnessy: Thanks for speaking with me, Gregory.
Miczek: Thank you, Andy.
Suggested Items
Cirexx International Inc. Chooses atg A9 Flying Probe Technology for High-speed Electrical Test
09/19/2024 | atg Luther & Maelzer GmbHatg Luther & Maelzer GmbH confirms delivery of high-speed bare board testing technology to PCB fabricator, Cirexx International Inc., in Santa Clara, CA.
Transtec and YAMAHA Motor Robotics to Showcase Latest Technology at SMTAI 2024
09/18/2024 | Yamaha Motor Robotics Holdings Co., Ltd.Trans-Tec America, in Partnership with Yamaha Robotics USA, will exhibit dynamic SMT assembly technologies at the SMTAI 2024 trade show and conference, October 20 - 24, 2024 at the Donald E. Stephens Convention Center in Rosemont, IL, USA.
TPY-4 Radar Completes Successful Risk Reduction Tests, 3DELRR program one step closer to battlefield success
09/17/2024 | Lockheed MartinThe U.S. Air Force Three-Dimensional Expeditionary Long Rang Radar (3DELRR) program team and Lockheed Martin successfully accomplished risk reduction testing for the TPY-4 radar. This event demonstrated the radar’s performance in a variety of conditions.
CentraTEQ Appointed as UK Distributor for MB Dynamics' Squeak & Rattle Test Systems
09/11/2024 | CentraTEQCentraTEQ, a leading UK supplier of Vibration Test Systems, proudly announces its new partnership as the exclusive UK distributor for German company MB Dynamics, renowned for their advanced buzz, squeak, and rattle (BSR) test systems.
NASA, Boeing Welcome Starliner Spacecraft to Earth, Close Mission
09/10/2024 | NASANASA and Boeing safely returned the uncrewed Starliner spacecraft following its landing at 10:01 p.m. MDT Sept. 6 at White Sands Space Harbor in New Mexico, concluding a three-month flight test to the International Space Station.