Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
It’s Only Common Sense: Your Biggest Competitor Is Complacency
The Chemical Connection: Onshoring PCB Production—Daunting but Certainly Possible
epoxySet Unveils UC-2210M - Urethane for Electronic Component Protection
April 29, 2024 | epoxySetEstimated reading time: Less than a minute
epoxySet introduces a new and unique, urethane potting compound. The UC-2210M was formulated to protect electronic components in high moisture and thermal environments including constant atmospheric exposure, oceanographic environments and high humidity conditions.
This room temperature curing system is easy to apply as a potting, encapsulation or casting compound. The low viscosity allows for easy air removal as well as penetration of intricate encapsulated areas.
UC-2210M cures to a semi-rigid polymer that minimizes stresses on delicate and sensitive components. It has good thermally conductive thus further protecting electronics from heat stresses. Offering exceptional thermal shock from -55 to 130 °C, it also provides high impact resistance.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Designers Notebook: Power and Ground Distribution Basics
10/29/2025 | Vern Solberg -- Column: Designer's NotebookThe principal objectives to be established during the planning stage are to define the interrelationship between all component elements and confirm that there is sufficient surface area for placement, the space needed to ensure efficient circuit interconnect, and to accommodate adequate power and ground distribution.
PCBA Market Poised to Reach $147.5 Billion by 2035
10/20/2025 | Globe NewswireGlobal printed circuit board assembly market is projected to reach $147.5 billion by 2035, at a CAGR of 4.7% during the forecast period 2025-2035
Würth Elektronik Participates in EU Initiative PROACTIF for Cutting-edge Drone and Robotics Solutions
10/14/2025 | Wurth ElektronikWürth Elektronik is a partner in the visionary EU project PROACTIF, funded under the Chips Joint Undertaking (Chips JU). The international consortium of 42 partners from 13 countries aims to strengthen Europe’s technological sovereignty i
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
Sumitomo Riko Boosts Automotive Design Efficiency 10x with Ansys AI Simulation Technology
10/13/2025 | SynopsysSumitomo Riko is implementing Ansys, part of Synopsys, Inc. AI technology to accelerate time-to-solution and improve efficiency during the design and manufacturing of automotive components.