Defense Speak Interpreted: If CHIPS Cuts Back, What Happens to Electronics Packaging Funds?
American Made Advocacy: Where’s the Budget for a Modern Military Run on Microelectronics?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
IPC APEX EXPO Retrospective: The Founders Look Back
May 30, 2024 | Marcy LaRont, PCB007 MagazineEstimated reading time: 1 minute
IPC APEX EXPO 2024 will soon feel like a distant memory, and by all accounts, it was a good show with an impressive display of technical knowledge. During the show, I visited with industry icons and IPC Hall of Fame recipients Dan Feinberg and Gene Weiner, who were among the original visionaries and founders of what became APEX EXPO. These individuals took me on a funny and engaging historic journey and a glimpse into how we arrived today. I witnessed their tremendous pride in being a part of an industry they helped to build—one that is still grounded in vision and optimism.
Marcy LaRont: I am here with two original stakeholders in what became IPC APEX EXPO. How and why did all of this begin?
Dan Feinberg: In the 1990s, the United States was still the most important location for printed circuit board manufacturing. We were the leaders. The most important and largest industry trade show at that time was NEPCON; there was NEPCON West and NEPCON East. The shows became prohibitively expensive, especially when it came to hosting hospitality. The two companies that did the biggest hospitality suites were my good friend Jim Hickman, who was running DuPont's Riston division, and myself, who was running Dynachem. Our costs on those hospitality suites were outrageous, literally hundreds of dollars a minute.
Gene Weiner: You are skipping an important part. In about 1993, if you were a voting member of IPC, you had to be a fabricator. Suppliers could be members, but they couldn’t vote. Suppliers were getting tired of having no voice. There was a lot of discussion.
To read this entire conversation, which appeared in the May 2024 issue of PCB007 Magazine, click here.
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/12/2025 | Marcy LaRont, I-Connect007We may be post-Labor Day, but it is still hot-hot-hot here in the great state of Arizona—much like our news cycles, which have continued to snap, crackle, and pop with eye-raising headlines over this past week. In broader global tech news this week, AI and tariff-type restrictions continues to dominate with NVIDIA raising its voice against U.S. lawmakers pushing chip restrictions, ASML investing in a Dutch AI start-up company to the tune of $1.5 billion, and the UAE joining the ranks of the U.S. and China in embracing “open source” with their technology in hopes of accelerating their AI position.
Machvision Leads Shift to Automated Inline Final Inspection, AOI in North America
09/10/2025 | Ralph Jacobo, all4-PCBSchweitzer Engineering Laboratories (SEL) chose Machvision inspection equipment due to its capabilities and versatility. Machvision of Taiwan offers circuit inspection, hole inspection and measurement, IC Substrate and HDI inspection, and final visual inspection solutions. The best fit for SEL was the 4.0Pro Circuit Inspection for inner and outer layers, and the AFI6 for final visual inspection of finished panels.
Dan Feinberg on Walt Custer: Remembering an Extraordinary Business Associate and Friend
09/09/2025 | Dan Feinberg, Technology Editor, I-Connect007The passing of Walt Custer marks the end of an era for all those who knew him and were helped and impressed by his presence, both personally and professionally. Walt's life was characterized by his unwavering commitment to the industry, his profound wisdom and willingness to share it, and his infectious enthusiasm for everything he did.
Building Electronics Excellence in India
09/08/2025 | Nolan Johnson, SMT007 MagazineFor over two decades, Dave Bergman has helped steer the Global Electronics Association’s work in India, from a single training course to a thriving regional operation with deep government and industry ties. In this interview, Dave explains how the group went from partnering with IPCA to opening its own office in 2010, creating India’s first domestic electronics manufacturing standard, and securing funding for dozens of Indian companies to attend U.S. trade shows.
Walt Custer: Making Data Interesting
09/03/2025 | Andy Shaughnessy, I-Connect007I just learned that IPC Hall of Famer Walt Custer has passed away at 81. I first met Walt about 20 years ago when I started covering the fabrication industry. Right away, he started telling me which companies to watch and which trends to follow. This was in the years following 9/11, and things were still pretty fluid.