AI Drives Carrier Boards to Return to Growth, Global Market will Reach $15.32B in 2024
July 16, 2024 | TPCAEstimated reading time: 3 minutes
Driven by emerging applications such as electric vehicles, AI and high-speed computing, the semiconductor industry is in a booming stage. Among them, IC carrier boards, which are crucial for packaging, have also attracted much attention. However, affected by global inflation in 2023, the consumer market will cool down rapidly, which will also affect the demand for carrier boards. Whether it is BT carrier boards used in mobile phones and memories, or ABF carrier boards used in CPUs and GPUs, there has been a decline. According to statistics from the Institute of Obstetrics and Mechanics of the Industrial Research Institute, the global output value of carrier boards in 2023 will be approximately US$13.34 billion, a decrease of 26.7% from 2022.
Looking forward to 2024, although the global economy still faces many uncertainties and geopolitical risks remain, as the inventory adjustment of end products takes effect and the consumer market shows signs of recovery, it will help the global carrier board market to recover. Especially driven by the strong demand for AI, it will further drive the recovery of high-end carrier boards. The global carrier board market is expected to reach US$15.32 billion in 2024, an increase of 14.8% from 2023.
In the global market, Taiwan is the largest carrier board supplier, accounting for approximately 32.8% of the overall output value; followed by Japan (27.6%) and South Korea (27.0%). The top five carrier board manufacturers are Taiwan's Xinxing (16.0%), South Korea's SEMCO (9.9%), Japan's Ibiden (9.3%), Austria's AT&S (9.1%) and Taiwan's Nandian (8.7%). Domestic carrier board manufacturers account for more than half of the global share IC carrier boards are divided into two categories: BT and ABF according to different substrate materials. In 2023, the overall demand for BT carrier boards will decline significantly due to the dual pressures of the decline of consumer electronics such as mobile phones and computers and the surge in memory inventories. In 2023, the global BT carrier board output value will be approximately US$6.18 billion, a decrease of 27.1%. According to Gartner's forecast, the memory market will recover strongly in 2024, with revenue expected to surge by 66.3%. As the memory market becomes active, the demand for related carrier boards will also be boosted. The global BT carrier board market is expected to grow by 16.5% in 2024, reaching US$7.20 billion.
In 2023, although AI servers are hot, ABF carrier boards will decline significantly due to the decline of the computer market and lower-than-expected demand for general servers. In 2023, the global ABF substrate output value will be approximately US$7.16 billion, a decrease of 26.3%. With the increasing demand for AI computing power and the development of advanced packaging technologies, such as CoWoS + 2.5D packaging that closely integrates HBM and GPU, it will help promote the development of ABF carrier boards in the direction of large area, multi-layer count and thin lines. In addition, AI PC is also expected to drive a replacement wave and promote the recovery of the ABF carrier board market. The global ABF carrier board market is expected to grow by 13.5% in 2024, reaching US$8.12 billion.
Looking to the future, although Taiwan, Japan and South Korea account for nearly 90% of global carrier boards, China and the United States are catching up. Among them, mainland China will use the "new quality productivity" strategy to achieve technological self-sufficiency. In addition to continuing to provide subsidies to the semiconductor industry, it will also actively increase the degree of autonomy of basic equipment such as AI chips, servers, switches, and RF radio frequencies. With the support of government funds and huge domestic demand market, mainland China's carrier board industry does have the opportunity to break through existing limitations and expand its influence in the future global market. On the other hand, the United States also continues to promote the localization of semiconductor supply chains. On November 20, 2023, the United States announced the National Advanced Packaging Manufacturing Plan (NAPMP), which will invest US$3 billion in advanced packaging pilot facilities, workforce training and project subsidies. Carrier boards are also included in this plan, which is sustainable. Observe whether the carrier board will affect the layout of global carrier board factories in North America after it is regarded as a strategic material by the United States.
Emerging application demands drive carrier board technology innovation, such as servers, high-computing power AI chips and memory (HBM), which are in short supply, and Intel announced in 2023 that it plans to achieve mass production of glass substrates by 2030, etc., allowing advanced packaging technology to Through horizontal or vertical integration of chips, it breaks through the limitations of traditional transistor density and opens up new possibilities for high-end applications such as HPC and AI. It is the key to the future development of the semiconductor and substrate industries.
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Breakthrough in Non-Contact Solder Removal Earns Kurtz Ersa 2025 Mexico Technology Award at SMTA Guadalajara
09/18/2025 | Kurtz Ersa Inc.Kurtz Ersa Inc., a leading supplier of electronics production equipment, is proud to announce that it has been awarded a 2025 Mexico Technology Award in the category of Rework & Repair for its HR 600P Automatic Rework System.
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
On the Line With… Podcast: UHDI and RF Performance
09/17/2025 | I-Connect007I-Connect007 is excited to announce the release of a new episode in its latest On the Line with... podcast series, which shines a spotlight on one of the most important emerging innovations in electronics manufacturing: Ultra-High-Density Interconnect (UHDI).
The Marketing Minute: Cracking the Code of Technical Marketing
09/17/2025 | Brittany Martin -- Column: The Marketing MinuteMarketing is never a one-size-fits-all endeavor, but the challenges are magnified for highly technical industries like electronics. Products and processes are complex, audiences are diverse, and the stakes are high, especially when your customers are engineers, decision-makers, and global partners who depend on your expertise.
EV Group Achieves Breakthrough in Hybrid Bonding Overlay Control for Chiplet Integration
09/12/2025 | EV GroupEV Group (EVG), a leading provider of innovative process solutions and expertise serving leading-edge and future semiconductor designs and chip integration schemes, today unveiled the EVG®40 D2W—the first dedicated die-to-wafer overlay metrology platform to deliver 100 percent die overlay measurement on 300-mm wafers at high precision and speeds needed for production environments. With up to 15X higher throughput than EVG’s industry benchmark EVG®40 NT2 system designed for hybrid wafer bonding metrology, the new EVG40 D2W enables chipmakers to verify die placement accuracy and take rapid corrective action, improving process control and yield in high-volume manufacturing (HVM).