ULT Introduce New Extraction Solution for Combustible and Carcinogenic Laser Dusts
August 6, 2024 | ULT AGEstimated reading time: 1 minute

ULT is introducing the LAS 260 H/Ex, a new solution for removing critical dust during various laser processes. The explosion-proof device was developed for extracting and filtering dry, combustible, and health-endangering pollutants (dust and fumes) that can arise during laser processing of plastics and metals.
As an ATEX-compliant system designed to be free of ignition sources, the LAS 260 H/Ex is suitable for installation and operation within a zone 22 and enables the safe separation of combustible dust. Even the finest particles are separated to 99.995% in a two-stage filter system including a HEPA H-14 filter and safety filter stage.
The safety filter with integrated activated carbon filling ensures the safe operation of the device and removes gases that are hazardous to health and unpleasant odors. Due to the high level of cleaning, the filtered clean gas can be fed back into the work area even when carcinogenic, mutagenic, or toxic dust is separated (recirculation mode).
In addition to the redundant filter system, the LAS 260 H/Ex provides further user benefits such as high flexibility through mobile utilization, extremely quiet operation, and low energy consumption.
All electrical components are suitable for UL and CE compliant use. In addition, the device can be used worldwide with a voltage range of 110-240 V.
To ensure compliance with the minimum volume flow of >20 m/s, an automatic monitoring system is integrated, which issues a warning signal if the flow falls below this limit.
A collection element (hose, pipe, extraction arm) with DN50 can be connected to the extraction and filter system. In addition, an M12 i
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Federal Electronics Mexico Boosts Speed and Flexibility with New Mycronic A40DX Pick-and-Place
07/23/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, has announced a major upgrade at its Hermosillo, Mexico facility with the installation of a Mycronic MYPro A40DX Pick-and-Place system, advancing its surface mount assembly capabilities for high-reliability electronics manufacturing.
DuPont Publishes 2025 Sustainability Report
07/22/2025 | PRNewswireDuPont published its 2025 Sustainability Report detailing the progress made toward achieving its 2030 Sustainability Goals.
NEOTech’s Westborough Facility Achieves AS9100 Surveillance Audit, Reinforcing Trust with Aerospace & Defense Customers
07/22/2025 | NEOTechNEOTech, a premier provider of electronic manufacturing services (EMS), integrated design engineering, and advanced supply chain solutions for the aerospace and defense, medical device, and high-tech industrial markets, proudly announces that its Westborough, Massachusetts facility has successfully completed the rigorous AS9100 Bi-Annual Surveillance Audit with zero findings, a testament to the company’s unwavering commitment to quality, security, and operational excellence.
PCBAA Wins Summit Silver Award from the American Society of Association Executives
07/18/2025 | PCBAAPCBAA was one of 38 associations that earned Silver Awards for outstanding contributions for an entry titled: Chips Don’t Float: More Printed Circuit Boards Must be Made in America.
INSPECTIS AB ‘Makes it a Meal’ with Series U50s Advanced Kit
07/18/2025 | INSPECTIS ABFamous chefs the world over maintain that an entrée doesn’t make a great meal without side dishes. At INSPECTIS, we call those ‘sides’ an Advanced Kit.