Dan’s Biz Bookshelf: Four Important Books You Need to Read (Not Just Say You Have)
The Marketing Minute: Cracking the Code of Technical Marketing
Space Flight Laboratory (SFL) Confirms Successful Deployment of HawkEye 360 Microsatellite Cluster 10
August 20, 2024 | BUSINESS WIREEstimated reading time: 2 minutes
Space Flight Laboratory (SFL) confirmed that HawkEye 360 Cluster 10 has been successfully launched and deployed in orbit. Cluster 10 brings to 30 the total number of radio frequency geolocation microsatellites developed for HawkEye 360 by SFL and is the third Cluster integrated at HawkEye 360’s Virginia facility under the SFL Flex Production Program.
Cluster 10 launched on August 16, 2024, at 2:56 p.m. EDT from Vandenberg Space Force Base, Calif., aboard the Transporter-11 Rideshare mission with SpaceX via launch integrator Exolaunch. All three microsatellites have communicated with ground control.
Based in Herndon, Va., HawkEye 360 is the global leader in radio frequency (RF) signal analysis and the first to use formation-flying microsatellites for terrestrial RF signal detection. This data is analyzed for many commercial applications including maritime situational awareness, emergency response, national security, and spectrum mapping.
Attitude control and formation flying by multiple spacecraft in orbit are a necessity for accurate RF signal geolocation, a primary consideration in HawkEye 360’s selection of SFL as its satellite provider. The acknowledged leader in small spacecraft stability, SFL has innovated compact, low-cost formation-flying technology at a maturity and price point unmatched in the microspace industry today.
All HawkEye 360 satellites developed by SFL are still in operation. SFL built the Pathfinder (Cluster 1) satellites on its 15-kg NEMO platform, launched in 2018. Subsequent clusters have been developed on the larger 30-kg SFL DEFIANT bus. For Pathfinder, Clusters 2-6 and 9, SFL handled the entire development process, including integration and testing, at its Toronto facility. Cluster 12 will incorporate technology updates and will also be integrated by SFL.
An early adopter of Flex Production, HawkEye 360 performed integration of the RF signal tracking payload with the DEFIANT bus for Clusters 7, 8 and 10 at its own plant with technical guidance from SFL. Clusters 11 and 13, now in development, will be integrated by HawkEye 360 in Virginia as well.
“SFL created Flex Production with NewSpace companies in mind, so they can leverage SFL’s microspace expertise while satisfying the financial requirements of an often-aggressive NewSpace business model,” said SFL Director Dr. Robert E. Zee. “NewSpace companies can mass produce satellites in-house at a price point that works for them under our flexible program.”
Flex Production gives customers the option of contracting SFL to completely develop the first satellite, or satellite cluster, at its Toronto facility. SFL can then assist the customer in setting up subsequent mass production at their own, or third-party, site for development of a large constellation of spacecraft. However, development can shift back to SFL when a new spacecraft design or technology update is requested.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Breakthrough in Non-Contact Solder Removal Earns Kurtz Ersa 2025 Mexico Technology Award at SMTA Guadalajara
09/18/2025 | Kurtz Ersa Inc.Kurtz Ersa Inc., a leading supplier of electronics production equipment, is proud to announce that it has been awarded a 2025 Mexico Technology Award in the category of Rework & Repair for its HR 600P Automatic Rework System.
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
On the Line With… Podcast: UHDI and RF Performance
09/17/2025 | I-Connect007I-Connect007 is excited to announce the release of a new episode in its latest On the Line with... podcast series, which shines a spotlight on one of the most important emerging innovations in electronics manufacturing: Ultra-High-Density Interconnect (UHDI).
The Marketing Minute: Cracking the Code of Technical Marketing
09/17/2025 | Brittany Martin -- Column: The Marketing MinuteMarketing is never a one-size-fits-all endeavor, but the challenges are magnified for highly technical industries like electronics. Products and processes are complex, audiences are diverse, and the stakes are high, especially when your customers are engineers, decision-makers, and global partners who depend on your expertise.
EV Group Achieves Breakthrough in Hybrid Bonding Overlay Control for Chiplet Integration
09/12/2025 | EV GroupEV Group (EVG), a leading provider of innovative process solutions and expertise serving leading-edge and future semiconductor designs and chip integration schemes, today unveiled the EVG®40 D2W—the first dedicated die-to-wafer overlay metrology platform to deliver 100 percent die overlay measurement on 300-mm wafers at high precision and speeds needed for production environments. With up to 15X higher throughput than EVG’s industry benchmark EVG®40 NT2 system designed for hybrid wafer bonding metrology, the new EVG40 D2W enables chipmakers to verify die placement accuracy and take rapid corrective action, improving process control and yield in high-volume manufacturing (HVM).