Dan’s Biz Bookshelf: ‘The Wizard and the Warrior: Leading with Passion and Power’
Marcy’s Musings: Destination Metallization
It’s Only Common Sense: Motivate Your Team by Giving Them What They Crave
PCB007 Magazine October 2024: Alternate Metallization Processes
October 16, 2024 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute
Traditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop. In the October 2024 issue of PCB007 Magazine, we examine alternate metallization methods, including MacDermid Alpha’s graphite technology and Uyemura’s RAIG technology.
In addition, John Johnson of American Standard Circuits discusses liquid metal ink as a process technology alternative. Dyconex talks about alternative metal elements from the standpoint of R&D and explains sputtering technology. And we revisit Mike Carano’s comprehensive overview of direct metallization technology from our July 2024 issue of PCB007 Magazine.
For all of that and more, get onboard for destination metallization.
Share on:
Suggested Items
OTC Markets Group Welcomes Firan Technology Group Corporation to OTCQX
10/17/2024 | Globe NewswireOTC Markets Group Inc., operator of regulated markets for trading 12,000 U.S. and international securities, announced Firan Technology Group Corporation, an aerospace and defence electronics product and subsystem supplier, has qualified to trade on the OTCQX® Best Market. Firan Technology Group Corporation upgraded to OTCQX from the Pink® market.
Calumet Electronics Leads US Organic Substrate Technology Innovation with KLA Corporation
10/17/2024 | Calumet ElectronicsCalumet Electronics of Michigan today announced it is pioneering organic substrate technology in the United States in collaboration with KLA Corporation, which also has a Michigan headquarters.
Altair Drives Aerospace Innovation at Motivo
10/17/2024 | AltairAltair, a global leader in computational intelligence, is proud to announce its collaboration with Motivo, a product engineering firm focused on translating forward-thinking visions into best-in-class products for clients in the mobility, energy, agriculture technology, and aerospace sectors. Motivo utilizes Altair’s unique combination of engineering consulting and software to drive innovation for organizations in the aerospace industry.
BOOK EXCERPT: The Printed Circuit Designer’s Guide to... DFM Essentials, Introduction
10/16/2024 | I-Connect007 Editorial TeamDesign for Manufacturing (DFM) is defined as the practice of designing printed circuit boards that meet not only the capabilities of the customer’s assembly manufacturing process, but also the capabilities of the board fabrication process to provide the highest reliability at the lowest possible cost.
Marcy’s Musings: Destination Metallization
10/17/2024 | Marcy LaRont -- Column: Marcy's MusingsTo reach your intended destination, you must have some form of pathway or route upon which to travel. It is much the same with the metallized traces and features on a printed circuit board. They are how electrical signals and power are carried from one point to another in an electronic device. Copper is the most prevalent metal conductor, but other metals are also used to a lesser degree, including gold, silver, tin, and palladium.