Beyond the Board: The Future of Innovation—Why the Electronics Industry Needs You
American Made Advocacy: New Congress, New Opportunities
The Government Circuit: News on Defense Electronics, Europe, and Sustainability
BOOK EXCERPT: The Printed Circuit Designer’s Guide to... DFM Essentials, Introduction
October 16, 2024 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
Introduction
One of the biggest challenges facing printed circuit board designers is properly understanding the cost drivers in the PCB manufacturing process, particularly the manufacturing of advanced technology PCBs.
Design for Manufacturing (DFM) is defined as the practice of designing printed circuit boards that meet not only the capabilities of the customer’s assembly manufacturing process, but also the capabilities of the board fabrication process to provide the highest reliability at the lowest possible cost.
The guidelines offered in this book are based on both ASC recommendations and IPC standards and apply to standard to advanced technology PCBs. UHDI technology may require violating many of the guidelines included within. It is also understood that some of these guidelines may require adjustment based on the material set, fabricator processes, and other design constraints.
While not a substitute for early design engagement with the PCB fabricator, in this book the reader will learn about these cost drivers (from the PCB manufacturer’s perspective) and the design decisions that will impact product reliability and help companies “design for success.”
Visit the I-Connect007 library to continue reading The Printed Circuit Designer’s Guide to DFM Essentials.
Share on:
Suggested Items
Ventec International Group Announce Launch of VT-47LT IPC4101 /126 Prepreg for HDI
03/12/2025 | Ventec International GroupVentec International Group announce launch of VT-47LT IPC4101 / 126 Prepreg. Are Microvia Failures Plaguing Your HDI Any Layer Designs? High-density interconnect (HDI) designs are pushing the envelope - higher layer count HDI relies on complex microvia designs: skip vias, staggered microvias, and stacked microvias in sequential laminations.
TI Introduces the World's Smallest MCU, Enabling Innovation in the Tiniest of Applications
03/12/2025 | PRNewswireTexas Instruments (TI) introduced the world's smallest MCU, expanding its comprehensive Arm® Cortex®-M0+ MSPM0 MCU portfolio. Measuring only 1.38mm2, about the size of a black pepper flake, the wafer chip-scale package (WCSP) for the MSPM0C1104 MCU enables designers to optimize board space in applications such as medical wearables and personal electronics, without compromising performance.
Speaking the Same Language as Your Fabricator
03/12/2025 | Andy Shaughnessy, Design007 MagazineWe do indeed have a failure to communicate; designers and fabricators often seem to be talking past each other, which can lead to jobs being put on hold. We asked Jen Kolar, VP of engineering for Monsoon Solutions, and columnist Kelly Dack to share their thoughts on ways that we can break down the communication barrier between design and fabrication. As they point out, a design kickoff checklist and a solid review process can be invaluable tools in a designer’s toolbox.
IPC Releases Latest List of Standards and Revisions
03/12/2025 | IPCEach quarter, IPC releases a list of standards that are new or have been updated. To view a complete list of newly published standards and standards revisions, translations, proposed standards for ballot, final drafts for industry review, working drafts, and project approvals, visit ipc.org/status. These are the latest releases for Q1 2025.
The Shaughnessy Report: Breaking Down the Language Barrier
03/11/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportAccording to Ethnologue’s 2024 update, there are currently 7,164 living languages being spoken today. It makes you wonder: Do they count PCB design as a language? PCB fabrication? Assembly?