TTM Technologies Reports Q3 2024 Results
October 31, 2024 | TTM TechnologiesEstimated reading time: 3 minutes
TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies and printed circuit boards (PCBs) reported results for the third quarter 2024, which ended on September 30, 2024.
Third Quarter 2024 Highlights
- Net sales were $616.5 million
- GAAP net income of $14.3 million, or $0.14 per diluted share
- Non-GAAP net income was $42.7 million, or $0.41 per diluted share, inclusive of a $17.8 million pre-tax, non-operational, foreign exchange loss
- Cash flow from operations was $65.1 million, or 10.6% of sales
- Book to bill of 1.20 for the third quarter
- A&D program backlog a record $1.49 billion
- Third Quarter 2024 GAAP Financial Results
Net sales for the third quarter of 2024 were $616.5 million, compared to $572.6 million in the third quarter of 2023.
GAAP operating income for the third quarter of 2024 was $51.0 million compared to GAAP operating loss for the third quarter of 2023 of $10.2 million, inclusive of a $44.1 million goodwill impairment charge related to the RF&S Components segment.
GAAP net income for the third quarter of 2024 was $14.3 million, or $0.14 per diluted share, compared to GAAP net loss for the third quarter of 2023 of $37.1 million, or ($0.36) per diluted share. GAAP net income for the third quarter of 2024 included a $17.8 million pre-tax foreign exchange loss, compared to a $0.9 million pre-tax foreign exchange gain in the third quarter of 2023.
Third Quarter 2024 Non-GAAP Financial Results
On a non-GAAP basis, net income for the third quarter of 2024 was $42.7 million, or $0.41 per diluted share. This compares to non-GAAP net income of $44.9 million, or $0.43 per diluted share, for the third quarter of 2023. Non-GAAP net income for the third quarter of 2024 included a $17.8 million pre-tax foreign exchange loss, compared to a $0.9 million pre-tax foreign exchange gain in the third quarter of 2023.
Adjusted EBITDA in the third quarter of 2024 was $84.4 million, or 13.7% of sales compared to adjusted EBITDA of $84.1 million, or 14.7% of sales for the third quarter of 2023. Adjusted EBITDA for the third quarter of 2024 included a $17.8 million foreign exchange loss, compared to a $0.9 million foreign exchange gain in the third quarter of 2023.
“TTM delivered strong operating margin performance due to higher revenues, favorable mix, and outstanding operational execution. Revenues reflected the third consecutive quarter of year on year growth due to demand strength in our Aerospace and Defense and Data Center Computing end markets, the latter being driven by generative AI,” said Tom Edman, CEO of TTM. “In addition, cash flow from operations was a healthy 10.6% of revenues enabling the company to maintain a solid balance sheet with a net leverage ratio of 1.4x,” concluded Mr. Edman.
Business Outlook
For the fourth quarter of 2024, TTM estimates that revenues will be in the range of $610 million to $650 million, and non-GAAP net income will be in the range of $0.44 to $0.50 per diluted share.
With respect to the Company’s outlook for non-GAAP net income per diluted share, we are unable to predict with reasonable certainty or without unreasonable effort certain items that may affect a comparable measure calculated and presented in accordance with GAAP. Our expected non-GAAP net income per diluted share excludes primarily the future impact of restructuring actions, impairment charges, unusual gains and losses, and tax adjustments. These reconciling items are highly variable and difficult to predict due to various factors outside of management’s control and could have a material impact on our future period net income per diluted share calculated and presented in accordance with GAAP. Accordingly, a reconciliation of non-GAAP net income per diluted share to a comparable measure calculated and presented in accordance with GAAP has not been provided because the Company is unable to provide such reconciliation without unreasonable effort. For the same reasons, TTM is unable to address the probable significance of the information.
Suggested Items
The Path Ahead: SMT007 Magazine—January 2025
01/02/2025 | I-Connect007 Editorial TeamJanuary is a traditional time to mark changes in our lives. A new year can signal new beginnings. But change is constant. So, as we flip over the calendar into 2025, we look at what’s ahead for the EMS supplier industry. What are your concerns and challenges? What trends are emerging? What can we expect from a new administration?
Laser Photonics and Fonon Technologies Deliver Training at Pearl Harbor Naval Shipyard & IMF for Effective Use of Laser Technology
01/02/2025 | BUSINESS WIRELaser Photonics Corporation (LPC), a leading global developer of industrial laser systems for cleaning and other material processing applications, in partnership with its sister company Fonon Technologies, announced the completion of training on the safe and optimal use of a DefenseTech laser system earlier purchased by the Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility (PHNSY & IMF).
IPC Announces UK Regional Qualification for Hand Soldering Competition
01/02/2025 | IPCIPC invites skilled soldering experts to participate in the UK Regional Qualification for the IPC Hand Soldering Competition (HSC) on February 4-6, 2025, at the Farnborough International Exhibition Centre.
TRI to Exhibit Advanced Test and Inspection at IPC APEX Expo 2025
01/01/2025 | TRITest Research, Inc. (TRI) will join the IPC APEX EXPO 2025 held at Anaheim Convention Center on March 18 – 20, 2025. Visit TRI at booth #2905 to experience TRI's latest test and inspection solutions for the electronics manufacturing Industry.
Happy New Year From I-Connect007
01/01/2025 | Nolan Johnson, I-Connect007As I-Connect007 observes the New Year’s Day holiday, we also wish you and yours a prosperous new year. We will be back covering the news of the industry tomorrow, January 2, 2025, according to the Gregorian calendar.