Does China Plus One Actually Work?
December 10, 2024 | Manfred Huschka, Manfred Huschka Management Consulting (Shenzhen) Ltd.Estimated reading time: 2 minutes
Editor’s note: This is the first of a two-part series. Part one focuses on China.
We all know of the current geopolitical challenges between the U.S. and China, which have motivated companies to investigate shifting supply chains to other countries, including Vietnam, Thailand, Mexico, India, and Malaysia while continuing to source mainly from China. This strategy is being referred to as China Plus One. In this two-part article, I will summarize the current economic trends in China, and look at the trends in wider Southeast Asia.
Why China Plus One?
To understand China Plus One, we must start with the Entity List, which is a trade restriction list published by the U.S. Department of Commerce's Bureau of Industry and Security (BIS). It consists of certain foreign persons, entities, or governments that are subject to specific license requirements for the export, re-export, and/or transfer (in-country) of specified items. Approximately 600 Chinese entities are on that list (Huawei is one well-known example).
When an entity appears on the Entity List, U.S. companies must stop doing business with that entity immediately. Yet, one won’t know in advance which companies might get added or when. Since many Chinese state-owned companies are, by default, also engaged in some kind of military business, maintaining compliance is often quite difficult. Rather than going through a lengthy license application process which may result in a refusal, many OEMs and some of their direct suppliers, such as EMS companies, are looking to de-risk their business by diversifying their supply chain to include some non-China suppliers.
In addition, the supply chain issues during COVID-19 restrictions affected manufacturers and consumers worldwide—from the non-availability of loaded container ships out of China due to lockdowns (Shanghai, Ningbo-Zhoushan, and Shenzhen are three of the world’s top four container ports), to the overcrowding of container ships mainly outside of the Port of Los Angeles, where both chassis and truck drivers were in short supply at the port and empty containers could not get shipped back to China in a timely fashion.
In March 2021, the Ever Given, a container ship that ran aground in the Suez Canal, blocked the canal for six days. The canal is believed to handle about 10% of global commercial maritime traffic, linking Asia's factories to European customers. It is also a major conduit for oil.
All these events led to the emergence of China Plus One. While the reasons for de-risking the supply chain are understandable, this is not an easy task for several reasons, including the size of the sourcing company. The bigger the company, the bigger their leverage to take a new supplier on board or convince an existing supplier to build a factory outside of China.
In theory, everything sounds relatively easy: “Just find another supplier outside of China.” The reality looks completely different because the entire logistics process, including costs, must be considered.
To read this entire article, which appeared in the November 2024 issue of PCB007 Magazine, click here.
Suggested Items
ALL Circuits, DBG Technology Strategic Alliance Delivers Optimal Global Footprint
12/17/2024 | ALL CircuitsWith DBG Technology, the 16th largest EMS globally, poised to acquire ALL Circuits, the largest EMS in France, they will create a global footprint that truly reflects the needs of OEMs in a geopolitically challenged world.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
EIPC Technical Snapshot: Factors Driving the Fluctuating Demand for PCBs
12/11/2024 | Pete Starkey, I-Connect007EIPC continued its series of online Technical Snapshots with a webinar on Nov. 21 presented by Dr. Hayao Nakahara of N.T. Information Ltd, who summarised world PCB production and shared his vision of the market over the next five years. With information gathered from many sources, Nakahara examined factors driving the increasing demand for printed circuit boards.
China Captures 61% of Global EV Traction Inverter Installation Volume in 3Q24, Europe Pushes Reforms to Rebound
12/10/2024 | TrendForceTrendForce’s latest findings show that global shipments of EV traction inverters reached 6.87 million units in the third quarter of 2024, representing a 7% QoQ increase, though the growth rate has slowed compared to the same period last year.
Low-Altitude Aviation’s Untapped Market Expected to Drive Solid-State Battery Demand to 302 GWh by 2035
12/04/2024 | TrendForceTrendForce’s latest investigations reveal that the development of flying cars and electric vertical take-off and landing aircraft (eVTOL)/urban air mobility (UAM) vehicles are positioning solid-state batteries as a key energy technology for low-altitude aviation.