Imec, Partners Unveil SWIR Sensor with Lead-free Quantum Dot Photodiodes
December 31, 2024 | ImecEstimated reading time: 2 minutes
At the 2024 IEEE International Electron Devices Meeting (IEDM), imec, a world-leading research and innovation hub in nanoelectronics and digital technologies, and its partners in the Belgian project Q-COMIRSE, present a first of its kind prototype shortwave infrared image sensor with indium arsenide quantum dot photodiodes. The sensor demonstrated successful 1390 nm imaging results, offering an environmentally friendly alternative to first-generation quantum dots that contain lead, which limited their widespread manufacturing. The proof-of-concept is a critical step toward mass-market infrared imaging with low-cost and non-toxic photodiodes.
By detecting wavelengths beyond the visible spectrum, shortwave infrared (SWIR) sensors can provide enhanced contrast and detail, as materials reflect differently in this range. These sensors can distinguish objects that appear identical to the human eye and penetrate through fog or mist, making them invaluable for applications such as face recognition or eye tracking in consumer electronics, and autonomous vehicle navigation. While current versions are costly and limited to high-end applications, wafer-level integration promises broader accessibility.
Quantum dots (QDs) are nanoscale semiconductor particles that can be engineered to emit and absorb light at specific wavelengths. Tuned for SWIR, they offer compact, low-cost absorbers, since integration into CMOS circuits and existing manufacturing processes is possible. However, first-generation QDs often contain toxic heavy metals such as lead and mercury, and the search for alternatives continues.
At 2024 IEDM, imec and its partners within the Q-COMIRSE project (Ghent University, QustomDot BV, ChemStream BV and ams OSRAM) introduced a SWIR image sensor featuring a lead-free quantum dot alternative as absorber; indium arsenide (InAs). The proof-of-concept sensor, tested on both glass and silicon substrates, was the first of its kind to produce successful 1390 nm imaging results. While QDs are considered fragile in nature, careful selection of stack materials resulted in >300 hour air-stability, enabling fab manufacturing compatibility. The pixel architecture can readily be integrated with CMOS technology for image sensing applications, but also allows flat panel display integration.
Pawel Malinowski, imec technology manager and domain lead imaging, emphasized the significance of this breakthrough: "The first generation of QD sensors was crucial for showcasing the possibilities of this flexible platform. We are now working towards a second generation that will serve as a crucial enabler for the masses - aiming at cost-efficient manufacturing in an environmentally friendly way. With major industry players looking into quantum dots, we are committed to further refine this semiconductor technology towards accessible, compact, multifunctional image sensors with new functionalities."
Stefano Guerrieri, Engineering Fellow at ams OSRAM, added: "Replacing lead in colloidal quantum dots with a more environmentally friendly material was our key goal in Q-COMIRSE. Our remarkable development work with Flemish partners imec, Ghent University, QustomDot and ChemStream paves the way toward a low-cost and Pb-free short-wave-infrared technology that, once mature for industrial products, could enable unprecedented applications in robotics, automotive, AR/VR and consumer electronics among others."
Suggested Items
Dan’s Biz Bookshelf: ‘Elevate: Push Beyond Your Limits'
07/16/2025 | Dan Beaulieu -- Column: Dan's Biz BookshelfI have read a lot of business books over the years. Some inspire, some educate, and a few do both while also shifting the way we approach leadership and personal growth. Robert Glazer’s "Elevate: Push Beyond Your Limits and Unlock Success in Yourself and Others" falls into the latter category.
Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
07/17/2025 | Jerome Larez -- Column: Global PCB ConnectionsIf you’ve ever seen an excellent PCB quote delayed, or worse, go cold because of a single line on the fab print, you’re not alone. Often, that line reads something like, “Use 370HR only,” or “IT-180A required.” These and other brand-name materials are proven performers, but unless your design needs that specific resin system (say, for RF performance, thermal reliability, or stringent CAF resistance), you may inadvertently be holding your job hostage.
It’s Only Common Sense: Why Sales Teams Fail (and How to Fix Them)
06/22/2025 | Dan Beaulieu -- Column: It's Only Common SenseIn sales, success is never a given. Despite best intentions, the most well-resourced sales teams can stumble. Understanding why is the first step toward creating a high-performing sales force. Here are the main reasons sales teams fail—and actionable strategies to fix them.
STI Celebrates Travis Wease’s 10 Years of Dedicated Service
06/17/2025 | STI Electronics, Inc.STI Electronics, Inc., a full-service organization providing training services, training materials, analytical/failure analysis, prototyping, and contract electronic manufacturing, proudly celebrated the 10-year work anniversary of Travis Wease, Master Instructor and valued team member.
The Marketing Minute: A Brand Visibility Playbook—Get Seen, Heard, and Remembered
06/18/2025 | Brittany Martin -- Column: The Marketing MinuteIn the competitive world of electronics, recognition isn’t given—it’s earned. With so many companies vying for attention, how do you ensure your brand voice stands out and stays top-of-mind? This month, I’m focusing on building recognition using three high-impact tools: social media, paid advertising, and thought leadership.