The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
Defense Speak Interpreted: Is DARPA Still Around After CHIPS?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
Real Time with... IPC APEX EXPO 2025: Transforming Engineering With Digital Solutions from Zuken
March 27, 2025 | Real Time with...IPC APEX EXPOEstimated reading time: Less than a minute
Bob Potock discusses Zuken's focus on digital engineering and a move away from traditional document-based processes to model-based designs. This change improves product definition, reduces design errors, and optimizes product parameters. Bob notes that the IPC-2581 standard is crucial for connecting designs, while AI enhances design efficiency. Connected manufacturing links design outputs directly to machines, reducing human error. The concept of digital twins is also discussed, showcasing AI's role in design optimization.
The 25th IPC APEX EXPO, March 18-20, 2025, at the Anaheim Convention Center in California, has concluded successfully. If you couldn’t make it to the show, don’t worry—the I-Connect007 team has coverage of the entire week’s events. Don’t miss our Real Time with… IPC APEX EXPO 2025 video interviews with the movers and shakers of the electronics industry.
Share on:
Suggested Items
Digital Twin Concept in Copper Electroplating Process Performance
07/11/2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/10/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
Showing Some Constraint: Design007 Magazine July 2025
07/10/2025 | I-Connect007 Editorial TeamA robust design constraint strategy balances dozens of electrical and manufacturing trade-offs. This month, we focus on design constraints—the requirements, challenges, and best practices for setting up the right constraint strategy.
Elementary, Mr. Watson: Rein in Your Design Constraints
07/10/2025 | John Watson -- Column: Elementary, Mr. WatsonI remember the long hours spent at the light table, carefully laying down black tape to shape each trace, cutting and aligning pads with surgical precision on sheets of Mylar. I often went home with nicks on my fingers from the X-Acto knives and bits of tape all over me. It was as much an art form as it was an engineering task—tactile and methodical, requiring the patience of a sculptor. A lot has changed in PCB design over the years.
TTCI Joins Printed Circuit Engineering Association to Strengthen Design-to-Test Collaboration and Workforce Development
07/09/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to announce its membership in the Printed Circuit Engineering Association (PCEA), further expanding the company’s efforts to support cross-functional collaboration, industry standards, and technical education in the printed circuit design and manufacturing community.