Marcy’s Musings: Operating Without a Rulebook
It’s Only Common Sense: Hire for Hunger, Train for Skill
Dan’s Biz Bookshelf: ‘The 'NVIDIA Way: Jensen Huang and the Making of a Tech Giant’
Implementing Inkjet Solder Mask: A Customer Success Story
January 13, 2026 | Paola Dinelli, KLAEstimated reading time: 1 minute
One of the most significant advancements in PCB manufacturing in recent years has been the shift from traditional solder mask processes to digital inkjet technology. This transition offers clear benefits in performance, usability, and production efficiency.
This article presents a case study of a PCB manufacturer that successfully implemented inkjet technology for solder mask application, realizing significant gains in quality, cost savings, and yield by overcoming the limitations of traditional methods.
The Challenge: Limitations of the Traditional Solder Mask Process
Before adopting inkjet technology, the PCB manufacturing customer relied on the traditional liquid photoimageable (LPI) solder mask application process. This multi-step workflow—coating, drying, exposure, development, and final curing—was time-consuming and required significant manual handling. Material waste was common, with excess solder mask ink lost during screen or curtain coating, from overspray, and when cleaning.
Solder mask would often flow into through-holes and vias, resulting in production challenges. Mask misalignments could occur during the manual or partially automated alignment process in the exposure step. Such misalignments would lead to registration errors and were often made worse by limited compensation for material variations. Additionally, our customer experienced defects caused by air bubbles, under-curing, and contamination from films or the surrounding environment, resulting in frequent rework and increased costs.
Lengthy changeover times were another drawback, as switching between jobs necessitated changing screens or films, which contributed to downtime and lower productivity. The process presented waste management challenges, because it involved phototool films and solvents, and the release of volatile organic compounds during curing. Additional operational challenges included cleaning chemicals, and high water and energy consumption.
To continue reading this article, which originally appeared in the December 2025 issue of PCB007 Magazine, click here.
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Connect the Dots: Designing for the Future of Manufacturing Reality—Solder Mask and Legend
04/09/2026 | Matt Stevenson -- Column: Connect the DotsPCBs seem to be getting more complex by the day, so it is important for designers to keep educating themselves about the realities of manufacturing increasingly intricate boards. Last month’s column highlighted design considerations for the strip-etch-strip process and how manufacturers approach that phase of production. Now that we have a functioning board, we must protect the PCB from environmental hazards and document the circuit components. This article will detail the solder mask and legend process and offer best practices for designers to ensure a high-quality result.
Fresh PCB Concepts: Dynamic Solder Mask Compensation in PCBs
03/19/2026 | Team NCAB -- Column: Fresh PCB ConceptsSolder mask has traditionally been treated as a secondary design layer, generated automatically after routing, reviewed briefly, and rarely revisited. In contemporary PCB fabrication, that assumption no longer holds. As conductor geometries shrink and assembly temperatures rise, solder mask has become a significant factor that influences manufacturability, yield, and long-term reliability.
Mycronic Receives Order for a Prexision 8 Evo
02/11/2026 | Mycronic ABMycronic AB has received a replacement order for a Prexision 8 Evo from an existing customer in Asia. The order value is in the range of USD 21-24 million. Delivery of the system is planned for the first quarter of 2027.
Siemens Acquires Canopus AI to Bring AI-based Metrology to Semiconductor Manufacturing
02/04/2026 | SiemensSiemens announced the acquisition of Canopus AI, an innovator in computational and AI-driven metrology solutions, enabling semiconductor manufacturers to achieve new levels of precision and efficiency in wafer and mask inspection processes.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
01/16/2026 | Marcy LaRont, I-Connect007I was in Chicago this week, where the weather went from sunny and 45° F on the day I arrived to snow and ice by the next morning. As a California/Arizona native, let’s just say I love the look of snow much more than I love driving in it. Still, I am grateful to have been part of some genuinely fun teambuilding with my colleagues at the Global Electronics Association. My must-reads for this week are a diverse grouping of articles and columns, ranging from printed electronics and additive manufacturing to a comprehensive overview of the European EMS and PCB markets to marketing wisdom and, finally, a book to help you reach your full potential, personally and professionally.