Autonomous Taxis Would Deliver Significant Environmental and Economic Benefits
July 9, 2015 | Lawrence Berkeley National LaboratoryEstimated reading time: 5 minutes
Imagine a fleet of driverless taxis roaming your city, ready to pick you up and take you to your destination at a moment’s notice. While this may seem fantastical, it may be only a matter of time before it becomes reality. And according to a new study from Lawrence Berkeley National Laboratory (Berkeley Lab), such a system would both be cost-effective and greatly reduce per-mile emissions of greenhouse gases.
The analysis found that the per-mile greenhouse gas emissions of an electric vehicle deployed as a self-driving, or autonomous, taxi in 2030 would be 63 to 82 percent lower than a projected 2030 hybrid vehicle driven as a privately owned car and 90 percent lower than a 2014 gasoline-powered private vehicle. Almost half of the savings is attributable to “right-sizing,” where the size of the taxi deployed is tailored to each trip’s occupancy needs.
The results were published online today by Nature Climate Change in an article titled, “Autonomous taxis could greatly reduce greenhouse gas emissions of U.S. light-duty vehicles,” co-authored by Berkeley Lab scientists Jeffery Greenblatt and Samveg Saxena.
“When we first started looking at autonomous vehicles, we found that, of all the variables we could consider, the use of autonomous vehicles as part of a shared transit system seemed to be the biggest lever that pointed to lower energy use per mile,” said Greenblatt.
Many automakers and other companies are working on autonomous cars. Right-sizing is cost-effective for both the fleet owner and for passengers, and small one- and two-seat vehicles are being explored by researchers and companies. To illustrate the concept, consider a single passenger with no luggage versus a party of four passengers with suitcases. The single passenger would require a much smaller taxi than the party of four, saving money for vehicle owners and passengers. Right-sizing, of course, assumes a fleet of taxis managed by a single entity.
“Most trips in the U.S. are taken singly, meaning one- or two-seat cars would satisfy most trips,” Greenblatt said. “That gives us a factor of two savings, since smaller vehicles means reduced energy use and greenhouse gas emissions.”
Another factor contributing to lower emissions for autonomous taxis is a cleaner electric grid. By 2030 power plants are expected to be using more renewable energy and emitting less pollution, meaning the greenhouse gas intensity of electricity will be lower.
Greenhouse gas (GHG) emissions intensities per mile for conventionally driven vehicles (CDVs) in 2014 and 2030, and autonomous taxis (ATs) in 2030. Cost-optimal vehicle technologies indicated by asterisks: ICEV, internal combustion engine vehicle; HEV, hybrid-electric vehicle; BEV, battery-electric vehicle.
Self-driving cars have additional efficiencies that have been covered in other research, such as the ability to drive closely behind other autonomous cars to reduce wind resistance (“platooning”), optimally routing trips, and smoother acceleration and braking. “These are all incremental, but they do add up,” Greenblatt said. “However, we didn’t even include these effects in our baseline results, and we still get huge savings without them.”
The researchers also conducted an economic analysis to determine how cost-effective autonomous taxis would be. At 12,000 miles per year, the average distance traveled in the U.S. for privately owned cars, electric vehicles in 2030 are still expected to be more expensive than owning and operating a gasoline-powered car, the study found.
But if the vehicle is driven 40,000 to 70,000 miles per year, typical for U.S. taxis, they found that an alternative-fuel vehicle (hydrogen fuel cell or electric battery) was the most cost-effective option. This was based on costs for maintenance, fuel, insurance, and the actual cost of the vehicle (assuming a five-year loan). The reason is that despite the higher cost of a more efficient vehicle, the per-mile cost of fuel is lower, so the savings can pay for the extra investment.
“You don’t often find that, where the cheapest is also the greenest,” Greenblatt said.
While autonomous technology is currently estimated to add as much as $150,000 to the cost of a vehicle, an autonomous taxi using today’s technology would still be cheaper than an ordinary taxi not simply due to its greater energy efficiency, but also due to the fact that no operator would be required. By 2030, autonomous taxis could be far cheaper than their driven counterparts.
The scientists did not try to estimate how widespread this technology would be in 2030. However, they did calculate that if five percent of 2030 vehicle sales (about 800,000 vehicles) were shifted to autonomous taxis, it would save about 7 million barrels of oil per year and reduce annual greenhouse gas emissions by between 2.1 and 2.4 million metric tons of CO2 per year, equal to the emissions savings from more than 1,000 two-megawatt wind turbines.
To estimate the number of trips taken by different numbers of occupants, the researchers analyzed National Household Travel Survey data from the Federal Highway Administration. The scientists then modeled hypothetical one- and two-seat vehicles based on Nissan Leaf parameters driving three test-drive cycles as defined by the Environmental Protection Agency (EPA) using Autonomie, a vehicle-modeling tool developed by Argonne National Laboratory that simulates energy consumption on a second-by-second basis.
Furthermore, the scientists explored the net energy effect of combining ride-sharing with right-sized autonomous taxis. For example, if 10 percent of one-person rides were shifted to two-person rides, the total miles traveled would decrease 3.1 percent while average energy consumption (due to the larger vehicle) would increase 0.6 percent, resulting in a net energy decrease of 2.5 percent.
Greenblatt said plans for further study on this topic are in the works, including exploring the effect of battery degradation, looking at optimal vehicle designs, and making a more realistic simulation of how a fleet of autonomous taxis would actually operate in a metropolitan area.
The study was funded in part by the Laboratory Directed Research and Development (LDRD) program at Berkeley Lab.
About Lawrence Berkeley National Laboratory
Lawrence Berkeley National Laboratory addresses the world’s most urgent scientific challenges by advancing sustainable energy, protecting human health, creating new materials, and revealing the origin and fate of the universe. Founded in 1931, Berkeley Lab’s scientific expertise has been recognized with 13 Nobel prizes. The University of California manages Berkeley Lab for the U.S. Department of Energy’s Office of Science. For more, visit www.lbl.gov.
About DOE
DOE’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States, and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov.
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/15/2025 | Marcy LaRont, I-Connect007In our industry, my top reads include Prashant Patel’s overview and argument for reshoring, which I found to be a great general overview and breakdown. In further support of the onshoring/reshoring message, I’m highlighting Nolan Johnson’s interview on the survey and report by the Reshoring Initiative. Check out my interview with USPAE’s Jim Will on the state of the flat panel display (FPD) industry and the risks associated with it for U.S. defense and critical infrastructure products.
Global Electronics Industry Remains Under Pressure from Rising Costs
08/04/2025 | Global Electronics AssociationThe global electronics manufacturing supply chain remains under pressure from rising costs, with 61% of firms reporting higher material costs and 54% noting increased labor expenses. according to the Global Electronics Association’s Sentiment of the Global Electronics Manufacturing Supply Chain Report.
Statement from the Global Electronics Association on the July 2025 Tariff on Copper Foil and Electronics-Grade Copper Inputs
07/31/2025 | Global Electronics AssociationWe are disappointed by today’s decision to impose a 50% tariff on imported copper foil and other essential materials critical to electronics manufacturing in the United States.
Direct Metallization: A Sustainable Shift in PCB Fabrication
07/31/2025 | Jim Watkowski, Harry Yang, and Mark Edwards, MacDermid Alpha Electronics SolutionsThe global electronics industry is undergoing a significant transformation, driven by the need for more resilient supply chains and environmentally sustainable manufacturing practices. Printed circuit boards (PCBs), the backbone of interconnection for electronic devices, are at the center of this shift. Traditionally, PCB fabrication has relied heavily on electroless copper, a process that, while effective, is resource-intensive and environmentally hazardous. In response, many manufacturers are turning to direct metallization technologies as a cleaner, more efficient alternative.
Considering the Future of Impending Copper Tariffs
07/30/2025 | I-Connect007 Editorial TeamThe Global Electronics Association is alerting industry members that a potential 50% tariff on copper could hit U.S. electronics manufacturers where it hurts.