UT 'Activates' Photonic Chip for Communication with Light
September 23, 2015 | University of TwenteEstimated reading time: 2 minutes
Sending information with the help of light is the future. It requires 'light chips', made of a special glass. Scientists from the UT research institute MESA+ have now managed to equip these light chips - which were already known for their extremely low losses - with new 'active' functionalities, such as generating, strengthening, and modulating light. Their chip is capable of creating a very wide light spectrum that runs from blue to infrared, spanning wavelengths of 470 to 2130 nanometres. By doing so they have made a light chip with the largest frequency range ever. The research has been published in the scientific journal Optics Express this summer.
You can send information with the help of light. For example, think of glass fibres that you can use to send digital information from one computer to the other. The width and regularity of the light spectrum plays a central role in this. With a broader spectrum (meaning a larger variety of colours in the light) and a large number of light channels set next to each other (individual colours), you can process a larger amount of information faster.
Creating such a spectrum with many individual lasers is technically very complex, expensive and less precise. Researchers have, therefore, been looking for methods to generate the broadest possible light spectrum on a chip for a long time. University of Twente scientists have now successfully managed to create a light chip with the broadest light spectrum ever. Their chip achieves a bandwidth of 495 THz, which is over half more than the previous record. According to research leader Prof. Dr Klaus Boller this broad spectrum demonstrates the potential of the technology. "However, the most important breakthrough is that we have managed to create it with the help of materials that have already proven themselves in practice. These materials have the lowest optic losses on a chip and are, therefore, already extremely relevant. What's more, the fabrication matches the standard processes in the chip industry, making it suitable for mass production."
Extra thick
In order to generate the broad spectrum, the researchers shone laser light into a structure that guides light, called a waveguide, made of a glass-like material, silicon nitride, embedded in regular glass (silicon oxide). The shape and construction of the waveguide ensures that the laser light generates new colours of light as it passes through—in this case going from 4 THz to a remarkable 495 THz. One of the key challenges of the research was ensuring that the silicon nitride did not crack during the manufacture of the waveguides. However, with a new fabrication technique, the researchers of the University of Twente managed to create a structure that is thick enough, 800 nanometers.
Frequency comb
The spectrum created by the chip is not constant, but consists of about twelve million peaks that lie at exactly the same distance from each other. Because of this, the spectrum looks like a hair comb; which is why such spectra have been given the name frequency comb. Frequency combs, a fast-growing field of research, make it possible to not only increase the speed of optic communication techniques, but also to greatly improve the precision of atomic clocks, telescopes, and GPS equipment.
Research
The research was performed by scientists from the Laser Physics and Nonlinear Optics department of UT research institute MESA+ (within the strategic research direction Applied Nanophotonics) in collaboration with the Westfälische Wilhelms-Universität (WWU) Münster and the companies LioniX and XiO Photonics. The research was financially supported by the Technology Foundation STW.
Suggested Items
Foxconn's Tiger Leap Combining Nature and Technology in Ecological Roof Garden
04/23/2025 | FoxconnHon Hai Technology Group, the world's largest technology manufacturing and service provider, has actively responded to the United Nations Sustainable Development Goals (SDGs).
IDTechEx Highlights Recyclable Materials for PCBs
04/10/2025 | IDTechExConventional printed circuit board (PCB) manufacturing is wasteful, harmful to the environment and energy intensive. This can be mitigated by the implementation of new recyclable materials and technologies, which have the potential to revolutionize electronics manufacturing.
Bridging the Gap Between PCB Designers and Fabricators
04/03/2025 | Stephen V. Chavez, Siemens EDAWith today’s advanced EDA tools, designing complex PCBs in the virtual world does not necessarily mean they can be built in the real world. This makes the relationship between a PCB designer and a fabricator pivotal to the success of a project. In keeping with solid design for manufacturing (DFM) practices, clear and frequent communication is needed to dial and lock in design constraints that meet expectations while addressing manufacturing concerns.
Hitachi Announces Completion of New Production Facility for Semiconductor Manufacturing Equipment
04/01/2025 | JCN NewswireHitachi High-Tech Corporation announced that the new production facility for semiconductormanufacturing equipment (etch systems), which had been under construction since December 2023 in the Kasado area (Kudamatsu City, Yamaguchi Prefecture), was completed and started the operation on March 17, 2025.
Paige Fiet: From Emerging Engineer to Quality at TTM
03/19/2025 | Marcy LaRont, PCB007 MagazinePaige Fiet is a graduate of the IPC Emerging Engineer program and now works at TTM Technologies in Logan, Utah. She was an IPC Student Board Member and has been a columnist for I-Connect007. She is a stellar example and an encouragement to other young engineers about how to be successful in your early career.