The Marketing Minute: Staying Positive When the Market Isn’t
Marcy’s Musings: Continuing to Invent the Future With SEL
It’s Only Common Sense: Why Failure Is an Opportunity for Growth
Flex Talk: Thoughts on the IPC Flexible Circuits–HDI Forum
November 19, 2015 | Tara Dunn, OMNI PCBEstimated reading time: 4 minutes
As an attendee at the IPC Flexible Circuits–HDI Conference held October 28–30, I found myself in a room full of people, all eager for technical information, with the opportunity to reconnect with industry friends and to make new connections. The audience was diverse with young people, new to our industry, sitting alongside industry veterans willingly sharing their knowledge and passion for HDI design and flexible circuit technology. The conference kicked off with intermediate level, half day tutorials on both flexible circuit design and HDI. The second and third days provided advanced level speaker presentations in 45-minute segments allowing time to digest the information, speak further with the presenters and network with industry peers.
Two comments made early in the technical conference solidified an event message in my mind. Event Chair Mike Carano, with RBP Chemical Technology, commented in his opening remarks that networking is one the greatest opportunities available with IPC. Brad Bourne of FTG gave the keynote presentation, “Organizational Commitment to High Reliability.” He presented the message that PCB reliability goes way beyond the manufacturing of the printed circuit board. Everyone in the industry impacts reliability: circuit board designers, raw material suppliers, fabricators, contract manufacturers and end users of the product.
Following the opening keynote, we were treated to a presentation by Andrew Schimmoeller and Jeffrey Friend of the Battelle NeuroLife Project. Their riveting presentation explained the use of flexible circuits in the design of a neurological stimulation system that re-animated a paralyzed hand, controlled by patient thoughts. I have re-watched the short video on this topic several times since the event. This is an inspiring example of the things our industry can accomplish by working together.
Throughout the conference, there were several presentations addressing flex and rigid-flex, including: design rules for flex performance, high-reliability flex and rigid flex, flex vs. flexibility and new developments in HDI technology. Beyond fabrication and design related information, we also learned of unique challenges with flex and rigid-flex in terms of stack up and impedance, reducing fabrication challenges with new materials, metallization for HDI and flex circuit technology. The amount of relevant technical knowledge disseminated in a short time period was staggering. I was continually reminded of the power of the combined knowledge of our speakers.
While many of the presentations detailed proven technology, reliability data and design criteria, we also learned of exciting emerging technologies including the latest developments in thin film metallization and via filling and a novel new approach for applying metallization to ultra-thin substrates. It will be interesting to follow these new technologies and see how they develop over the next few years.
Page 1 of 2
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Lessons From a Thousand Columns: Dan Beaulieu on Writing, Selling, and Staying the Course
08/21/2025 | Michelle Te, I-Connect007For 20 years, Dan Beaulieu has been a steady voice in sales and marketing, offering weekly columns that challenge, inspire, and guide professionals in the electronics industry and beyond. Soon, he will reach a remarkable milestone—his 1,000th It’s Only Common Sense weekly column. In this Q&A, we look behind the scenes of Dan’s writing journey, exploring what has kept him motivated, the lessons he’s learned along the way, and how two decades of weekly columns have shaped his career and the industry conversation.
University Of Minnesota Team Claims Victory In Bright Manufacturing Challenge 2025 Round 1
08/19/2025 | EMACThe Electronics Manufacturing & Assembly Collaborative (EMAC) recently announced that Team "Rise and Grind Crew" from the University of Minnesota has emerged victorious in Round 1 of the Bright Manufacturing Challenge 2025.
The Knowledge Base: Cultivating Your Brand in the Age of Connection
08/19/2025 | Mike Konrad -- Column: The Knowledge BaseAudiences have evolved in how they consume information, form opinions, and make purchasing decisions. While marketing still relies on tried-and-true methods—get your name and message in front of your audience—you must also cultivate connection, credibility, and community. Your customers, particularly the younger generation of engineers, buyers, and program managers, want to discover value on their terms.
American Made Advocacy: Where’s the Budget for a Modern Military Run on Microelectronics?
08/19/2025 | Shane Whiteside -- Column: American Made AdvocacyIn a world of peer threats and urgent transformation, having secure, trusted, and reliable microelectronics is non-negotiable. While largely hidden, microelectronics are the ubiquitous enablers of modern defense platforms. Nothing in the current American arsenal flies, floats, or fights without a technology stack that includes a semiconductor, an integrated circuit substrate, and a printed circuit board.
Meet with The Test Connection Inc. (TTCI) at SMTA Guadalajara 2025
08/18/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a trusted provider of electronic test and manufacturing solutions for more than 45 years, is pleased to announce its participation at the upcoming SMTA Guadalajara Expo & Tech Forum, taking place September 17–18, 2025, at Expo Guadalajara, Salón Jalisco Hall D & E.