Typical synthetic hydrogels are brittle, barely stretchable, and adhere weakly to other surfaces.

“They’re often used as degradable biomaterials at the current stage,” Zhao says. “If you want to make an electronic device out of hydrogels, you need to think of long-term stability of the hydrogels and interfaces.”

To get around these challenges, his team came up with a design strategy for robust hydrogels, mixing water with a small amount of selected biopolymers to create soft, stretchy materials with a stiffness of 10 to 100 kilopascals — about the range of human soft tissues. The researchers also devised a method to strongly bond the hydrogel to various nonporous surfaces.

In the new study, the researchers applied their techniques to demonstrate several uses for the hydrogel, including encapsulating a titanium wire to form a transparent, stretchable conductor. In experiments, they stretched the encapsulated wire multiple times and found it maintained constant electrical conductivity.

Zhao also created an array of LED lights embedded in a sheet of hydrogel. When attached to different regions of the body, the array continued working, even when stretched across highly deformable areas such as the knee and elbow.

A versatile matrix

Finally, the group embedded various electronic components within a sheet of hydrogel to create a “smart wound dressing,” comprising regularly spaced temperature sensors and tiny drug reservoirs. The researchers also created pathways for drugs to flow through the hydrogel, by either inserting patterned tubes or drilling tiny holes through the matrix. They placed the dressing over various regions of the body and found that even when highly stretched the dressing continued to monitor skin temperature and release drugs according to the sensor readings.

Yuk says an immediate application of the technology may be as a stretchable, on-demand treatment for burns or other skin conditions.

“It’s a very versatile matrix,” Yuk says. “The unique capability here is, when a sensor senses something different, like an abnormal increase in temperature, the device can on demand release drugs to that specific location and select a specific drug from one of the reservoirs, which can diffuse in the hydrogel matrix for sustained release over time.”

Delving deeper, Zhao envisions hydrogel to be an ideal, biocompatible vehicle for delivering electronics inside the body. He is currently exploring hydrogel’s potential as a carrier for glucose sensors as well as neural probes. Conventional glucose sensors, implanted in the body, typically spark a foreign-body response from the immune system, which covers the sensors with dense fibers, requiring the sensors to be replaced often. While various hydrogels have been used to coat glucose sensors and prevent such a reaction, the hydrogels are brittle and can detach easily with motion.  Zhao says the hydrogel-sensor system his group is developing would likely be robust and effective over long periods. He says a similar case might be made for neural probes.

“The brain is a bowl of Jell-O,” Zhao says. “Currently, researchers are trying different soft materials to achieve long-term biocompatibility of neural devices. With collaborators, we are proposing to use robust hydrogel as an ideal material for neural devices, because the hydrogel can be designed to possess similar mechanical and physiological properties as the brain.”

This research was funded, in part, by the Office of Naval Research, the MIT Institute for Soldier Nanotechnologies, and the National Science Foundation.

Page 2 of 2

Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Testimonial

"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."

Julia McCaffrey - NCAB Group

Suggested Items

REPORT: Cloud and AI Demand to Drive Electronics Assembly Market Past $4 Trillion by 2030

11/18/2026 | Global Electronics Association
By 2030, the market for global electronics assembly will be valued at more than $4 trillion, according to the Global Electronics Association’s 2026 Global Electronics Assembly Report.

I-Connect007 Releases Final Episode of Qnity’s Engineering What’s Next Podcast Series

11/18/2026 | I-Connect007
I-Connect007 is pleased to announce the release of the sixth and final episode of On the Line with… Qnity: Engineering What’s Next, a podcast series exploring the advanced materials, emerging technologies, and engineering challenges shaping the future of electronics. In this episode, titled “Designing Sustainability into Electronics,” Marcy LaRont speaks with Siri Kore, business sustainability leader for Interconnect Solutions at Qnity, about the growing importance of integrating sustainability into electronics design and materials development from the earliest stages.

CirTran Reports 48% Q3 Revenue Growth, Nearly Triples Nine-Month Sales

11/17/2026 | PRNewswire
Net sales for the third quarter of 2026 reached $663,511, up 47.9% from $448,492 in Q3 2025, driven by continued demand for the Company's products including vapor product line.

LPMS USA Celebrates 10 Years of Innovation, Growth, and Industry Partnerships

11/17/2026 | LPMS USA
LPMS USA, a provider of low pressure molding equipment, materials, tooling, and engineering services for electronics protection, is celebrating its 10th anniversary, marking a decade of growth, innovation, and commitment to helping manufacturers implement reliable electronics protection solutions.

Sypris Solutions Reports 25% Q3 Revenue Growth and 123% Increase in Orders

11/17/2026 | Sypris Solutions Inc.
Revenue for the quarter increased 25% year over year, driven by a 41% increase for Sypris Technologies and a 14% increase for Sypris Electronics.
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in