Organic Crystals Allow Creating Flexible Electronic Devices
February 3, 2016 | Lomonosov Moscow State UniversityEstimated reading time: 3 minutes
Scientists from the Faculty of Physics of the Moscow State University have grown organic semiconductor crystals which can reduce the cost of the process of creating light, flexible and transparent light-emitting electronic devices of the new generation.
A team of researchers from the Faculty of Physics of Moscow State University in cooperation with Russian and foreign colleagues learnt to grow organic semiconductor crystals with extremely high light-emitting efficiency that promise a bright future for wet-processed organic optoelectronics.
Moreover, they made a double breakthrough using much simpler and cheaper technologies that previously were considered impractical. The scientists have published the results of their work in the latest issue of the Applied Materials and Interfaces journal.
The organic optoelectronics is a rapidly growing area that promises to achieve the ultimate dream to make light, flexible and transparent electronic devices of the new generation, such as organic light-emitting transistors (OLET) and organic lasers pumped by electric current. This is, indeed, a very promising area: the organic semiconductors due to their availability can even replace silicon in some electronic applications.
It was believed that the organic semiconductor crystals grown from the vapor phase are much preferred than the ones grown from solution, since those obtained from vapor are purer and free of structure impurities. A group of physicists from the Moscow State University, led by Professor Dmitry Paraschuk, are of those who do not share this opinion, and prefer the solution growing for several reasons, particularly because of much simpler and cheaper technologies stemming from this method.
In their study, so called thiophene-phenylene oligomers were chosen as work-horse molecules. The desired molecules were synthesized for them by chemists from the Moscow State University and the Enikolopov Institute of Synthetic Polymeric Materials of RAS. At the Faculty of Physics of the Moscow State University crystals were grown from solution of these molecules. Their luminescent and electrical properties were measured there as well.
The main results of this study were overwhelming: the solution-grown crystals are more luminescent than their analogues obtained from vapor. Their quantum yield (i.e. the ratio of the number of photons emitted to the number of absorbed ones) reached 60%, whereas vapor-grown crystals presented no more than 38%.
Such a striking difference in the luminescence efficiency is explained, particularly, by the fact that, perhaps, during the solution-growing some internal radiationless channels that take some part of the excitation energy are suppressed in crystals. But, apparently, this is not the only explanation.
"We have found reasons for such a high quantum yield, but we are not ready to publish these yet. This is a matter of our future studies, "- told Professor Paraschuk.
It is noteworthy that despite all previously known disadvantages of the solution-growing techniques, the new study made it possible to talk about their advantages compared to the vapor-growing methods of crystals. In one of the recent researches, the group of Paraschuk found out that crystals can be grown on the surface of the solution instead of a solid substrate, due to the surface tension forces.
"We have shown that it is possible to grow crystals on the surface of the liquid in different ways. Roughly speaking, after we place a solution with molecules in a vessel and then begin to cool it, under some certain conditions we allow molecules to be deposited on the surface at the "air-liquid" interface. Because the liquid surface is almost perfect, the crystals grown on it are of good quality, and owing to their high electronic performance they are much more preferable to the vapor-grown ones. Moreover, the surface of the solution-grown crystals is molecularly smooth with angstrom-scale roughness, which allows us to create field-effect transistors on their basis, and its quality is irreplaceable in this case" - says the professor.
Dmitry Paraschuk emphasizes that the applicability of the crystals in light-emitted transistors, and therefore in organic optoelectronics is just a suggestion, the validity of which is still to be proved. The same situation is with the possibility of creating lasers controlled by electric current obtained on the same basis.
"People dream to get lasers that can ignite by simple connection of the film to the power source, but they haven't achieved success yet,"- told Paraschuk. - "We hope that with the help of organic crystals we can reach this goal. The combination of good conductivity and high efficiency allows us to hope that the first electrically pumped laser will be created on the basis of such crystals."
Suggested Items
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.
RTX's Raytheon Awarded $736M Contract to Produce AIM-9X Missiles
10/10/2024 | RTXRaytheon, an RTX business, was awarded a $736 million contract from the U.S. Navy to produce AIM-9X® SIDEWINDER® missiles.
Rocket Lab Awarded NASA Study Contract to Explore Bringing Rock Samples from Mars to Earth for the First Time
10/08/2024 | BUSINESS WIRERocket Lab USA, Inc., a global leader in launch services and space systems, announced the Company has been selected by NASA to complete a study for retrieving rock samples from the Martian surface and bringing them to Earth for the first time.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 4
10/03/2024 |Chapter 4 of this book addresses the challenges in ensuring high electrical reliability of low-temperature solder pastes in modern electronic assembly. Also covered is the need for new-generation materials due to advancements in technology. The authors also explore the impact of flux components on electrical reliability and the formulation considerations to achieve higher reliability.
Yamaha Motor Completes Expansion and Renovation at Hamamatsu Robotics Office
10/02/2024 | Yamaha Motor Co., Ltd.Yamaha Robotics announced that the Company has held a ceremony to celebrate the completion of renovation and expansion work at the Hamamatsu Robotics Office, which develops, manufactures, and sells surface mounters and industrial robots, as well as the 40th anniversary of the Robotics Business, which started in 1984 as the IM Division.