Dan’s Biz Bookshelf: Four Important Books You Need to Read (Not Just Say You Have)
The Marketing Minute: Cracking the Code of Technical Marketing
New-Generation Exoskeleton Helps the Paralyzed to Walk
February 5, 2016 | UC BerkeleyEstimated reading time: 1 minute
This week, a new, lighter and more agile exoskeleton, for which the Kaz lab developed the original technology, was unveiled earlier this week: The Phoenix, by SuitX, a company that has spun off the robotics lab. Kazerooni is its founder and CEO.
The Phoenix is lightweight, has two motors at the hips and electrically controlled tension settings that tighten when the wearer is standing and swing freely when they’re walking. Users can control the movement of each leg and walk up to 1.1 miles per hour by pushing buttons integrated into a pair of crutches. It’s powered for up to eight hours by a battery pack worn in a backpack.
“We can’t really fix their disease,” says Kazerooni. “We can’t fix their injury. But what it would do is postpone the secondary injuries due to sitting. It gives a better quality of life.”
Kazarooni and his team have developed a series of exoskeletons over the years. Their work in the field began in 2000 with a project funded by the Defense Advanced Research Projects Agency to create a device, now called the Berkeley Lower Extremity Exoskeleton (BLEEX), that could help people carry heavier loads for longer. At that time, Kazerooni also realized the potential use for exoskeletons in the medical field, particularly as an alternative to wheelchairs.
The team began developing new devices to restore mobility for people who had become paraplegic.
In 2011, they made the exoskeleton that helped Berkeley senior Austin Whitney, paralyzed from the waist down in a 2007 car accident, make an epic walk across the graduation stage to receive his diploma. Soon after, the Austin Project was created in honor of Whitney, with a goal of finding new technologies to create reliable, inexpensive exoskeleton systems for everyday personal use.
Today, the Phoenix is one of the lightest and most accessible exoskeletons to hit the market. It can be adjusted to fit varied weights, heights and leg sizes and can be used for a range of mobility hindrances. And, although far from inexpensive at $40,000, it’s about the half the cost of other exoskeletons that help restore mobility.
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
Dan’s Biz Bookshelf: Four Important Books You Need to Read (Not Just Say You Have)
09/18/2025 | Dan Beaulieu -- Column: Dan's Biz BookshelfDan Beaulieu continues his popular book review series by reviewing four classic books that he believes everyone should have on their bookshelf. In this column, he reviews "The Prince" by Niccolò Machiavelli, "The Art of War," by Sun Tzu, "How to Win Friends and Influence People," by Dale Carnegie, and "Think and Grow Rich," by Napoleon Hill. While we've all heard of these books and maybe read them, Dan will give you a new perspective.
Wisdom From Data-center Power Pioneer Mike Mosman
09/02/2025 | Barry Matties, I-Connect007Few engineers have moved the levers of modern electronics more decisively than Mike Mosman. From the pre-email computer rooms of the 1980s to today’s hyperscale campuses cranking out AI cycles, the retired power engineer and co-founder of CCG Facilities Integration has spent four decades proving that uptime is a design discipline, not a hope.
Connect the Dots: How to Avoid Five Common Causes of Board Failure
09/04/2025 | Matt Stevenson -- Column: Connect the DotsBoards fail for various reasons, and because I’ve been part of the PCB industry for a long time, I’ve seen most of the reasons for failure. As part of my ongoing crusade to help designers design for the reality of manufacturing, here are five common causes for board failure and how to avoid them.
Elementary Mr. Watson: Routing Hunger Games—May the Traces Be Ever in Your Favor
08/26/2025 | John Watson -- Column: Elementary, Mr. WatsonI’d like to share a harsh truth, and I say this as a friend: PCB designers are often their own worst enemy. It’s rarely the complexity of the circuit, the last-minute changes from mechanical, the limited enclosure space, or the ever-expanding list of design rules that send projects to the dust heap of failed boards. More often, it's our own decisions, made too quickly and narrowly, and with too little foresight, that sabotage an otherwise good design.
Standard of Excellence: The Human Touch in an Automated World
08/27/2025 | Anaya Vardya -- Column: Standard of ExcellenceWe live in a world where everything from groceries to tech support is a click away. Automation has revolutionized the way we conduct business. From order tracking systems to AI-powered chatbots, automation can increase speed, improve accuracy, and reduce costs. However, with all that progress comes a critical challenge: How do we ensure that we don’t lose the human touch, the very thing that makes business relationships meaningful?