-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueAdditive Manufacturing
In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
The Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
The Institute of Circuit Technology Tewkesbury Seminar, 1st March 2016
March 8, 2016 | Pete Starkey, I-Connect007Estimated reading time: 8 minutes
The two-year MACFEST project had set out to utilise the properties of ionic liquids to produce solderable finishes with improved joint reliability, and had just passed its half-way point. New ionic-liquid-based nickel-palladium-gold systems were being investigated and a process for the deposition of good quality palladium and gold coatings onto ‘aqueous’ electroless nickel has been developed. PCB test coupons were currently being prepared for evaluation, and would also be tested as part of a major SMART Group programme taking place over the coming few months. Potential benefits of coatings resulting from the MACFEST project would be a reduction of environmental impacts through the elimination of cyanide-based aqueous chemistries and a reduction in the amount of palladium consumed. The principal technical benefit would be the elimination of known reliability issues with nickel-palladium-gold finishes deposited from aqueous chemistry, particularly black pad effects, brittle joints and void formation. And the new coatings would meet the requirements of the industry and current IPC standards. Further information may be found on the MACFEST website[2].
Project Manager and Research Fellow at Coventry University, Narinder Bains gave the final presentation, on the optimisation of process conditions for the maskless electrochemical patterning of materials, with particular reference the university’s collaboration in the MESMOPROC project, co-funded by the EU Eco-Innovation initiative.
The concept of electrochemical ‘maskless’ selective metallisation of materials had been established and demonstrated in the Enface process, where instead of a plating resist image being applied photolithographically to each workpiece then stripped off after a single operation, the image was applied to the anode and effectively re-used many times. With the selectively masked anode placed close to the workpiece, and using a low-acid, low-metal electrolyte and good agitation, the pattern on the anode could be replicated in metal deposited on the workpiece, enabling selective metallisation of microscale devices, components and printed circuit boards. A limitation of the process had been the difficulty in maintaining the intensity and uniformity of solution agitation when scaling up the electrochemical reactor.
In the MESMOPROC project, low frequency ultrasound was introduced to the system to enable high efficiency, focused agitation. The team at Coventry, with many years’ experience of ultrasonics applications, had modified the reactor to incorporate ultrasonic transducers and had studied the general effects of ultrasound on the electrochemical deposition process. The team had then studied the effects of ultrasound on deposit quality in low metal, low acid copper electrolytes with commercial electroplating additives. It had been demonstrated that low or no acid electrolyte formulations, together with very narrow anode-cathode spacing gave the best image reproduction and good deposit quality, although low frequency ultrasound tended to increase additive consumption. The overall conclusion was that ultrasound increased the limiting current density and opened up the process window.
The MESMOPROC process had been demonstrated and validated at pilot scale in a PCB shop and a specialist plating shop, and offered enhanced efficiency through a shorter and simpler process using fewer materials and less energy, with reduced waste generation and CO2 emissions. Further information may be found on the website[3].
In his closing comments, Bill Wilkie acknowledged the generosity of Exception PCB Solutions in supporting the event, and reported that the membership of the Institute continued to increase, presently standing at over 350, with members drawn from over 100 companies. The seminar had once again brought together an enthusiastic group of industry professionals to further their technical knowledge and their awareness of business trends, and, equally importantly, to network with their peers.
I am grateful to Alun Morgan for allowing me to use his photographs.
References
Based in the U.K., I-Connect007 Technical Editor Pete Starkey has more than 30 years’ experience in the PCB industry and a background in process development, technical service and technical sales. Starkey is a fellow of the Institute of Technology, a member of the SMART Group Technical Committee, and an active supporter of the European Institute of Printed Circuits.
Page 2 of 2Suggested Items
DuPont Showcases AI Innovations Featuring Advanced Interconnects at 2024 International Electronic Circuits Exhibition
05/13/2024 | DuPontDuPont announced it will showcase its comprehensive range of advanced circuit materials and solutions at the 2024 International Electronic Circuits Exhibition in Shanghai. With a product portfolio that includes fine line, signal integrity, power and thermal management, DuPont will exhibit at Booth #8L06 at the National Exhibition and Convention Center (NECC) from May 13 to 15.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.