New Discovery for Better Batteries
April 8, 2016 | Uppsala UniversityEstimated reading time: 2 minutes
Materials researchers at Uppsala University have made new discoveries in understanding energy storage in lithium-ion (Li-ion) batteries. This will help in the design of new materials for future batteries with significantly higher storage capacity than up to now.
Working with researchers from the Universities of Oxford and Kent in England and from the USA, researchers from Uppsala University are looking into special kinds of Li-ion battery materials which can provide batteries with higher energy levels those in use today.
‘We discovered for the first time that oxygen in the electrodes behaved in an unexpected manner. Usually, oxygen takes up two electrons as fast as it can. In this material, it released one of them again and this is what provides the higher capacity seen in the charging process,’ says Laurent Duda, university lecturer in physics at Uppsala University.
The study, published in Nature Chemistry on 21 March, was produced by scientists from a number of different fields of research and was carried out using a synchrotron light source called Advanced Light Source, ALS. Advanced X-ray spectroscopy was necessary to understand how the materials work. This is a sophisticated spectroscopic technique which researchers at Uppsala University have helped to develop over the last 25 years since its inception.
Li-ion batteries are well-known power sources found in almost all portable electronics, such as mobile phones, computers and household appliances. Battery development is mainly focused upon producing more powerful batteries with greater capacity and power output. There are many different kinds of materials which can be used in lithium batteries and they all have different kinds of useful properties.
‘It has been mostly oxide materials with a combination of metals such as nickel, cobalt and manganese which have seemed the most promising storage electrodes for high energy in lithium batteries. But certain combinations of metals give an unexpectedly high storage capacity and the reason for this has been argued about for a long time,’ says Kristina Edström, professor of chemistry at Uppsala University.
Researchers previously thought that the extra storage capacity depended only upon unwanted side effects which produce oxygen in the electrolyte when lithium batteries are charged to their limit. Another possible explanation has been that so-called peroxides have been formed which break down the electrode material.
For the new study, researchers used advanced X-ray spectroscopy to examine a variant of a so-called Li-rich material. Other methods provide summary information on the battery material but with X-ray spectroscopy it is possible to follow how every kind of atom behaves when a battery is being charged.
According to the study, only some oxygen atoms in the material act this way, namely those close to manganese and lithium, where they form a ‘localized island’ until the battery is discharged again.
‘This discovery will enable us to research into ways to customize materials combinations with appropriate manganese content levels,’ says Laurent Duda.
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Curing and Verification in PCB Shadow Areas
09/17/2025 | Doug Katze, DymaxDesign engineers know a simple truth that often complicates electronics manufacturing: Light doesn’t go around corners. In densely populated PCBs, adhesives and coatings often fail to fully cure in shadowed regions created by tall ICs, connectors, relays, and tight housings.
Marcy’s Musings: Advancing the Advanced Materials Discussion
09/17/2025 | Marcy LaRont -- Column: Marcy's MusingsAs the industry’s most trusted global source of original content about the electronics supply chain, we continually ask you about your concerns, what you care about, and what you most want to learn about. Your responses are insightful and valuable. Thank you for caring enough to provide useful feedback and engage in dialogue.
September 2025 PCB007 Magazine: The Future of Advanced Materials
09/16/2025 | I-Connect007 Editorial TeamMoore’s Law is no more, and the advanced material solutions being developed to grapple with this reality are surprising, stunning, and perhaps a bit daunting. Buckle up for a dive into advanced materials and a glimpse into the next chapters of electronics manufacturing.
I-Connect007 Launches Advanced Electronics Packaging Digest
09/15/2025 | I-Connect007I-Connect007 is pleased to announce the launch of Advanced Electronics Packaging Digest (AEPD), a new monthly digital newsletter dedicated to one of the most critical and rapidly evolving areas of electronics manufacturing: advanced packaging at the interconnect level.
Panasonic Industry will Double the Production Capacity of MEGTRON Multi-layer Circuit Board Materials Over the Next Five Years
09/15/2025 | Panasonic Industry Co., Ltd.Panasonic Industry Co., Ltd., a Panasonic Group company, announced plans for a major expansion of its global production capacity for MEGTRON multi-layer circuit board materials today. The company plans to double its production over the next five years to meet growing demand in the AI server and ICT infrastructure markets.