Development of Circuit Technology that Resolves Issues with High-Frequency Piezoelectric Resonators
June 20, 2016 | NICTEstimated reading time: 1 minute
In collaboration with the National Institute of Information and Communications Technology (NICT), Associate Professor Hiroyuki Ito and Professor Kazuya Masu, et al., of the Tokyo Institute of Technology, developed a new algorithm and circuit technology allowing high-frequency piezoelectric resonators to be used for phase locked loops (PLL). It was confirmed that these operate with low noise and have an excellent Figure of Merit (FoM) compared to conventional PLLs.
This technology allows high-frequency piezoelectric resonators to be used in place of crystal oscillators which was a problem for realizing compact and low-cost radio modules. This greatly contributes to the creation of compact, low-cost, high-speed radio communication systems for the IoT age. High-frequency piezoelectric resonators are compact, can be integrated, have an excellent Q value, and oscillators that use these have excellent jitter performance. High-frequency piezoelectric resonators had greater issues with resonance frequency variance and temperature dependability compared to crystal resonators. However, these issues were resolved by the development of a PLL that uses a channel adjustment technique, which is a new algorithm.
A prototype was fabricated by a silicon CMOS process with a minimum line width of 65 nm, and a maximum frequency output of approximately 9 GHz was achieved with a phase fluctuation of only 180 femtoseconds. Power consumption was 12.7 mW. This performance is equivalent to a PLL Figure of Merit (FoM) of -244 dB, and it has the world’s top-class performance as a fractional-N PLL. This can contribute to the realization of compact, low-cost, high-speed radio communication systems.
The study results will be announced in local time June 17 in "The 2016 Symposium on VLSI Circuits" to be held in Hawaii from June 14.
Suggested Items
Shane Whiteside of Summit Reflects on Today's PCB Landscape
05/08/2024 | I-Connect007 Editorial TeamSummit Interconnect began as a printed circuit board manufacturing company just eight years ago and has seen impressive growth organically and through acquisition. Summit President and CEO Shane Whiteside takes a few moments to share his thoughts on the growing PCB industry in the United States.
BAE Systems and Eaton Expand Collaboration to Deliver Electric Drive Solutions for Heavy-Duty Trucks
05/08/2024 | PRNewswireBAE Systems, a leader in electric propulsion, and Eaton, a global power management company, are expanding their collaboration to include electric vehicle (EV) solutions for heavy-duty trucks.
Coherix Partners with EMU on 'Factory of the Future' Technology Program
05/08/2024 | PRNewswireMichigan-based Coherix is working with Eastern Michigan University (EMU) in Ypsilanti to develop "factory-of-the-future" manufacturing and assembly technology.
2024 Apple iPad Pro Estimated to Ship Between 4.5 to 5 Million Units
05/08/2024 | TrendForceApple’s recent product launch in May introduced a lineup of new tablets featuring advanced AMOLED screens. Notably, the Pro version boasts a dual-layer tandem structure designed to address the longstanding challenges of screen burn-in and lifespan that are common with AMOLED displays.
Simbe Partners with Plexus to Scale Manufacturing and Meet Global Retail Demand
05/08/2024 | Globe NewswireSimbe, the leading provider of Store Intelligence™ solutions that increase retailer performance through unprecedented visibility and insights, today announced a partnership with Plexus Corp. to bring its best-in-class retail robotics-as-a-service to market quickly and at global scale.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in