Defense Speak Interpreted: Is There Still a CHIPS Act?
Beyond the Board: Empowering the Next Generation of Tech Innovators in Electronics
The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
Setting a Satellite to Catch a Satellite
July 11, 2016 | ESAEstimated reading time: 2 minutes
The target is set: a large derelict satellite currently silently tumbling its way through low orbit. If all goes to plan, in 2023 it will vanish – and efforts against space debris will have made a giant leap forward.
That is the vision underpinning e.Deorbit, intended as the world’s first mission to remove a large piece of space junk – if it is given the initial go-ahead by Europe’s space ministers at the Agency’s Ministerial Council in December.
The basic idea is simple: set a satellite to catch a satellite. e.Deorbit will rendezvous with, grapple and hard-capture the drifting satellite, then push the pair down to burn up harmlessly in the atmosphere.
More than 75% of trackable space debris whizzes around in Earth’s heavily trafficked low orbits, below 2000 km altitude. Even if all launches stopped tomorrow, the level of debris would go on rising, driven by continuing collisions.
The only way to stabilise debris levels over the long run will be to remove entire large items.
“While the concept is straightforward, the implementation is not – e.Deorbit will be like nothing ESA has ever attempted before,” explains Robin Biesbroek, ESA’s study manager.
“The chaser satellite requires extremely sophisticated guidance, navigation and control to synchronise motion and then capture its target, guided in turn by advanced image processing, blending inputs from optical and multispectral cameras as well as ‘laser radar’ lidar to derive a precise, reliable sense of the target and its motion.
“In addition, e.Deorbit needs a reliable method of capturing its target. We are now looking at a net, harpoon or gripper as well as advanced robotics to secure the two satellites together.
“Finally, the satellite also requires a very high level of autonomy, because continuous realtime control from the ground will not be practical, especially during the crucial capture phase.”
ESA’s Clean Space initative, focused on safeguarding the terrestrial and orbital environments, has supported e.Deorbit development so far.
“Industry is eager to participate,” says Luisa Innocenti, heading Clean Space. “The mission should be a spectacular showcase for the capabilities of Europe’s space businesses.
“The industry consensus is that a new class of ‘space tugs’ will arise to offer various services such as in-orbit servicing or refuelling.
“The technologies such spacecraft will require overlap with those being developed for e.Deorbit – so it will be the first of the space tugs, demonstrating its performance with an unprecedented achievement.
“After this Ministerial, we propose to finalise the design and realistically test key technologies – including weightless net testing on a suborbital rocket – to be ready to build after final approval from the next Ministerial, for a planned launch in April 2023.”
Share on:
Suggested Items
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
Kitron Wins Additional €7 Million Contract, Expanding Presence in Industrial Automation
06/06/2025 | KitronKitron has signed a significant manufacturing agreement with a leading customer in the industrial automation sector. The agreement covers electronics manufacturing services for a new generation of high-performance drive modules used in automation and motion control systems.
Connect the Dots: Proactive Controlled Impedance
05/29/2025 | Matt Stevenson -- Column: Connect the DotsFrom data centers to smartphones, designers know that the ohms have it. Getting impedance right ensures all-important signal integrity and delivers high-performing boards. Our designers understand the importance of controlled impedance, but not everyone addresses it in their designs. The most common and important controlled impedance types we see include microstrip, stripline, embedded microstrip, and differential pairs.
Trouble in Your Tank: Yield Improvement and Reliability
05/22/2025 | Michael Carano -- Column: Trouble in Your TankThere’s a simple rule of business in manufacturing: “It is all about yields.” Higher yields for your products allow for increased profits and satisfied customers. When there are lower yields, overall cost to manufacture increases, and the additional time and strain on the factory floor affect the entire operation. Lower yields are often the result of “process drift,” when critical process parameters and specialized plating additives fall outside their acceptable ranges.
Keysight Quantum Control System Embedded within Fujitsu and RIKEN’s World-Leading 256-Qubit Quantum Computer
05/16/2025 | BUSINESS WIREKeysight Technologies, Inc. announced that its Quantum Control System (QCS) has been selected as the control system embedded within Fujitsu and RIKEN’s recently developed 256-qubit quantum computer at the RIKEN RQC-FUJITSU Collaboration Center in Japan, marking a pioneering step in the industry’s pursuit of fault tolerant quantum computer.